Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Bathroom Vanity Installation Cost in Dallas?
Bathroom vanity installation in Dallas typically costs between $800 and $3,000, with most homeowners paying around $1,400 to $2,200 for a standard single-sink vanity replacement including the new cabinet, countertop, sink, faucet, and professional labor. Smaller powder-room vanities or basic reinstallations land on the lower end, while double-sink vanities, custom cabinetry, plumbing relocations, and premium stone tops push the price toward the top of that range.
That number covers the work a licensed contractor in Dallas performs: removing the old vanity and old shutoff valves, checking the wall for water damage and squared framing, installing the new cabinet level and secured to studs, setting the top and sink in place, wiring up the faucet and drain, and hauling away everything that came out. It does not include repairing hidden water damage if the wall behind your current vanity has been leaking for years before anyone opened it up. We see that often in older Dallas homes, especially in Lake Highlands, East Dallas, and the M Streets, where original cast-iron drain lines and decades-old supply lines finally give out behind the cabinet.
Mason Remodeling Co Dallas delivers a written price before any work starts on every vanity installation, so you will see the exact dollar figure, the scope, and the guarantee in writing before you ever schedule a visit. Call (432) 302-8761 for a free estimate, and you will speak with a live person who can schedule a measurement for your vanity project.
Key Takeaways
- Dallas bathroom vanity installation runs $800 to $3,000, with most jobs landing in the $1,400 to $2,200 window.
- The vanity cabinet itself accounts for roughly 40 to 55 percent of the total cost; labor runs $350 to $900 for a straightforward same-location swap.
- Relocating plumbing or moving a drain line adds $500 to $1,800 depending on where the lines need to go.
- A double-sink vanity costs $900 to $3,000 installed, versus $800 to $1,800 for a single-sink unit.
- Dallas homes built before 1990 often carry a high chance of hidden water damage behind the old vanity, which can add $200 to $1,500 in drywall and framing repairs.
- Mason Remodeling Co Dallas provides a written price before any work begins and backs every completed vanity job with the 365-Day Done Right Promise.
Bathroom Vanity Installation Cost Breakdown (2026)
Here is what a vanity installation in Dallas actually costs, line by line. These numbers reflect the 2026 Dallas market and what we at Mason Remodeling Co Dallas see across single-family homes in neighborhoods like Preston Hollow, Lakewood, Casa Linda, and Richardson adjacent areas.
| Line Item | Cost Range | Notes |
|---|---|---|
| Vanity cabinet (stock, 30 – 48 inch, single sink) | $250 – $800 | Big-box and supplier-level stock cabinetry; particleboard or plywood box |
| Vanity cabinet (semi-custom or solid wood) | $700 – $1,800 | KraftMaid or Wellborn lines; dovetail drawers, soft-close hardware |
| Countertop (cultured marble or laminate) | $100 – $350 | Pre-fabricated with integrated sink |
| Countertop (quartz, Silestone, Caesarstone) | $350 – $900 | Fabricated to fit, undermount sink cutout |
| Sink and faucet | $100 – $600 | Standard vitreous china sink; faucet brands include Moen, Kohler, or Toto |
| Labor (same-location swap) | $350 – $900 | Demo, disposal, install, seal, hookups, cleanup |
| Plumbing modifications (relocate supply lines or drain) | $500 – $1,800 | Cost rises with distance from existing stack and slab-versus-pier-and-beam access |
| Drywall or framing repair (if water damage found) | $200 – $1,500 | Common in pre-1990 Dallas homes; more if mold remediation is required |
| Permit (where required by city of Dallas) | $50 – $150 | Most simple swaps do not require a permit; relocations may |
| Haul-away and disposal | $50 – $150 | Old vanity, sink, and debris removed from the property |
So a standard single-sink vanity replacement in Dallas, where the plumbing stays exactly where it is, should fall between $800 and $1,800. A double vanity with a quartz top, upgraded faucets, and modest plumbing adjustments lands between $1,800 and $3,000. Once you add custom cabinetry, wall-mount faucets, or moving a drain across a bathroom, the number can pass three thousand dollars, but those are the exceptions, not the baseline.
What drives the cost up or down more than anything else is what you pick for the cabinet itself. A stock 36-inch vanity from a big-box store with a cultured marble top looks fine, installs quickly, and keeps the project budget-friendly. A KraftMaid or Wellborn vanity with soft-close drawers, a solid plywood box, and a paintable or stained hardwood face looks and functions like a piece of furniture rather than a cabinet. The labor to install either one is nearly identical. The difference is the material cost, and that is a decision only you can make after seeing both options and their prices in writing.
What Affects Bathroom Vanity Installation Pricing in Dallas
No two vanity jobs quote the same, even in the same house. Here are the factors that move a Dallas vanity installation from eight hundred dollars up to three thousand dollars, based on what we see week after week across the metroplex.
- Single versus double vanity. A double vanity is wider, heavier, requires two sets of supply lines and drain connections, and usually needs a longer countertop slab. The step up from single to double adds $400 to $1,200 in material and labor on top of the base price.
- Plumbing location changes. If you want the vanity moved from one wall to another, or if the existing drain pipe sits at the wrong height for the new cabinet, the plumber has to cut into the wall or floor and reroute lines. In pier-and-beam Dallas houses, access from below makes this easier. On a slab foundation, which covers most of Dallas north of I-30, the work is slower and more invasive. Budget $500 to $1,800 just for the plumbing portion.
- Age and condition of what is behind the wall. Many Dallas homes built before 1990 have copper supply lines that have corroded, or galvanized nipples that have rusted to the shutoff valve. Removing an old vanity often reveals soft drywall, rotten base plates, or floor damage around the toilet or tub. Repairs range from $200 to $1,500 and are impossible to see until the old cabinet is removed. A company that gives you a written price before starting will flag this possibility and quote repair work separately so you are never surprised.
- Countertop material. Cultured marble is the lowest-cost top and works well in powder rooms and guest baths. Quartz from Cambria, Silestone, or Caesarstone requires fabrication, a template visit, and a second trip for installation. That process adds $250 to $650 over a prefabricated top and usually extends the timeline by one to two weeks.
- Faucet and sink hardware choices. A builder-grade Moen faucet costs less than a hundred dollars. A wall-mounted Toto or Grohe fixture can run several hundred and requires a different rough-in valve inside the wall, adding $200 to $500 in labor alone. Choose your fixtures before the plumber opens the wall, and the entire job goes faster and cheaper.
- Access and parking in specific Dallas neighborhoods. Homes in Uptown, Oak Lawn, and the Knox-Henderson corridor often have narrow alleys, permit parking zones, or delivery restrictions that complicate material drop-off. Those constraints may add a small logistics fee, typically $50 to $150, but they rarely break the budget. Older high-rise condos with freight elevator restrictions are a different story; if you live in a Dallas condo tower, mention that during the estimate call.
How Much Does a Vanity Cost by Size in Dallas?
Vanity width drives the cabinet price, so most of what you spend depends on what fits in your bathroom’s footprint. Here is the breakdown by common Dallas bathroom sizes.
- 24-inch vanity: Powder rooms and tight guest baths. Cabinet and top run $150 to $450; installed cost typically $800 to $1,200. This is the least expensive vanity size to buy and install.
- 30-inch and 36-inch vanities: The most common sizes in Dallas single-family homes. Expect the full job between $900 and $1,800 depending on material choices.
- 48-inch vanity: Standard for shared bathrooms. Runs $1,200 to $2,200 installed, more if you choose semi-custom cabinets or quartz.
- 60-inch double vanity: Two sinks, wider countertop slab, more plumbing connections. Installed cost runs $1,800 to $3,000. Custom double vanities with stone tops can exceed the top of that range, though most Dallas homeowners stay within it.
- 72-inch or larger double vanity: Found in larger homes in North Dallas, Preston Hollow, and Southlake-adjacent areas. Budget $2,400 to $3,500 and anticipate a longer lead time on the cabinet and top fabrication.
Measure your old vanity before you call anyone. Width, depth, and height all matter, but width is what drives the numbers above. A good rule of thumb: if the new vanity fits in the same footprint as the old one, you save the cost of plumbing changes, flooring repairs, and most of the surprises that inflate a quote.
Is It Cheaper to Repair a Vanity or Replace It?
If the cabinet box is solid and the only problems are cosmetic, like peeling paint, a stuck drawer, or a hinge that has pulled loose, repair makes financial sense and usually costs between $150 and $500. But if the vanity has water swelling around the base, a cracked countertop, a rusted sink, or doors that no longer close square, replacement is almost always the better deal. You would spend $400 to $1,000 on repairs and refinishing only to still have an aging cabinet with no guarantee, and in a Dallas bathroom that sees daily humidity swings from air conditioning, the damage tends to return.
We tell Dallas homeowners the truth on this: if the vanity is less than ten years old and the damage is isolated, repair it. If it is beyond ten years old, has reached the end of its finish, or the water damage has touched the cabinet box, replace it. Replacement gives you new shutoff valves, new supply lines, a sealed cabinet that can handle the humidity, and a written guarantee from a contractor who stands behind the whole installation. Call (432) 302-8761 for an honest assessment; the estimate is free, and no one at Mason Remodeling Co Dallas will push you toward replacement if a repair makes more sense.
How to Save on Bathroom Vanity Installation
There are a handful of ways to trim the cost of a vanity project in Dallas without cutting corners that will come back to haunt you.
- Keep the plumbing where it is. Moving a drain or supply line is the single most expensive line item on most quotes. Leaving the sink in the same wall position can save $500 to $1,800 immediately.
- Choose a stock-width cabinet. A 30-inch or 36-inch stock vanity from a cabinet supplier costs hundreds less than a custom or odd-size cabinet. If you can fit a standard width, do it.
- Use a prefabricated top. Cultured marble or builder-line quartz tops with integrated sinks install in one trip and cost $250 to $650 less than fabricated stone with a separate sink cutout and template appointment.
- Buy the faucet during a supplier sale. Kohler, Moen, and Toto run promotions several times a year. A good faucet at 25 percent off saves real money, and a licensed installer can use whatever quality fixture you have purchased.
- Combine the vanity job with other bathroom work. If you already plan to replace flooring, re-caulk the tub, or update the toilet, bundling those items into one project saves on trip fees and disposal costs. A single visit with a single written price beats three separate service calls.
- Get a written price and stick to it. A contractor who gives you a verbal range and adjusts upward at the end was never giving you a real price. Mason Remodeling Co Dallas provides a written price before any work starts, on every project, every time. That document is your cost control.
One more practical note: if you are in a Dallas home built on a slab and the vanity sits against an interior wall, a rerouted drain often costs less than you fear because the plumber can often route through an adjacent wall cavity rather than chipping the slab. Pier-and-beam homes are even easier: the plumber works from underneath. Wherever you live in Dallas, the best way to get a real number is to have a professional look at the actual plumbing layout. A free estimate call to (432) 302-8761 is the fastest way to know your true cost.
What is Included in a Professional Vanity Installation?
Not every Dallas contractor includes the same scope of work in a vanity quote. Here is what a proper installation includes, and what Mason Remodeling Co Dallas puts in writing before the first tool comes off the truck.
- Removal and disposal of the old vanity, sink, faucet, and drain assembly. Everything from the old installation is taken from the home and disposed of legally. The wall and floor behind the old unit get inspected for water damage before anything new goes in.
- Shutoff valve replacement. Old angle stops are always replaced, never reused. This is a small-cost item that prevents a major failure later. On old Dallas homes with original valves, we will often find corrosion where the stop threads onto the copper or galvanized stub-out.
- Water supply line conversion. If the old shutoffs are threaded and the new faucet uses compression connections, we convert and upgrade the lines rather than cobbling together adapters that will leak.
- Cabinet install, leveled and secured to studs. A correctly installed vanity is anchored to the wall framing so it will not shift or pull away from the wall over time. Shims are used to correct out-of-level floors, common in older Dallas houses.
- Countertop and sink setting. The top is bedded in sealant and secured. The sink is set, whether it is an integrated top or a separate undermount sink with a fabricated stone top.
- Faucet, drain, and P-trap connection. The faucet is installed according to the manufacturer’s specifications, tested, and adjusted. The drain is connected and checked for leaks under running water.
- Cleanup and walkthrough. The work area is swept and cleaned. The homeowner sees the finished installation, tests the faucet and drains, and receives the written guarantee coverage in hand.
We also photograph the work area before, during, and after so there is a record of what was found behind the old vanity: clean framing, old water stains, or damage that might be relevant later. That kind of transparency is part of the written price and written guarantee model that has been in place since Isaac Pruett and the Threshold Group set the standard back in 2004.
Who Do You Send to My Home, and How Will I Know Who They Are?
We lead with this because it is the first question many Dallas homeowners, especially those often home alone or with young children, ask before they consider letting anyone through the door. Mason Remodeling Co Dallas operates under The Threshold Standard, a named and enforceable process that applies to every visit, without exception.
Here is how it works. When you schedule a vanity installation, you receive the name and photo of the technician who will be at your door before that person arrives. On arrival, the technician presents a photo ID badge at the door, and you verify the face matches the photo you received. The technician is background-checked, identity-verified, and uniformed in a clean, marked Mason Remodeling uniform. You never have to guess who is standing on your porch.
Isaac Pruett and the Mason Remodeling Co Dallas team have been doing this since 2004 as part of the Threshold Group family of home-service companies, and the verification step has never once been skipped as a convenience to scheduling. You will always know exactly who is coming, what they will do, what it costs, and what happens if anything goes wrong.
What Does the Guarantee Cover?
Every vanity installation completed by Mason Remodeling Co Dallas carries the 365-Day Done Right Promise. The coverage is written, specific, and stated in plain terms: if the work is not right within 365 days from the completion date, Mason Remodeling makes it right at no cost to the homeowner. That includes the installation workmanship, the connection of plumbing performed by our techs, and the cabinet and top installation. What it does not cover, and what we state plainly on the written guarantee, includes damage from misuse, modifications by others, normal wear, and products that fail under their own manufacturer warranty.
There is a second guarantee that runs alongside the Done Right Promise: if a repair or installation fails, you get a free return visit at no charge, with no dispute process and no conditions. You call, we schedule, we fix it. The guarantee is not a verbal promise; it is in writing on every project, including the scope, the exclusions, and the covered duration. This has been the standard at Mason Remodeling Co Dallas since this location opened under the Threshold Group name.
FAQs – Bathroom Vanity Installation Cost
How much does a bathroom vanity install cost in Dallas?
Most bathroom vanity installations in Dallas cost between $800 and $3,000, with the typical single-sink replacement landing at $1,400 to $2,200 including the vanity, top, sink, faucet, labor, and disposal. The most common reasons the price moves up are double vanities, plumbing relocations, and the choice of a custom cabinet or fabricated quartz top. Call (432) 302-8761 for an exact written quote; the estimate is free.
Is it cheaper to replace a bathroom vanity or just the countertop?
Replacing only a countertop and sink runs $350 to $1,000 in Dallas, while a full vanity replacement typically runs $800 to $3,000. If the cabinet box is solid, dry, and has drawers and doors that still function, a countertop-only replacement is the cheaper option. If the cabinet has water damage, swelling, or a failing finish, replacing the entire unit is the better long-term value because you get new structure, new shutoff valves, and a written guarantee.
How long does bathroom vanity installation take?
A straightforward same-location vanity swap in Dallas takes 3 to 6 hours, including demolition, disposal, plumbing adjustments, cabinet install, top and sink set, faucet hookup, and cleanup. If a fabricated stone top is involved, the template and fabrication add one to two weeks to the overall timeline, though the on-site installation remains a single-day job once the top is ready.
Do I need a permit to replace a bathroom vanity in Dallas?
Most simple vanity replacements, where the new cabinet occupies the same footprint and the plumbing stays in place, do not require a permit from the city of Dallas. If the project relocates a drain line, adds a new supply run, or involves moving walls, a plumbing permit is often required and costs $50 to $150. A licensed contractor will determine this and handle the permit process as part of the written quote.
Can Mason Remodeling install a vanity I bought myself?
Yes. If you have already purchased a vanity, top, sink, or faucet, Mason Remodeling Co Dallas will install it under the same written price and written guarantee. The labor-only install typically runs $350 to $900 for a standard single-sink unit. We do inspect the materials before installation to confirm they are undamaged, complete, and compatible with your existing plumbing, and that inspection is part of the pre-work visit.
How much does it cost to move a bathroom vanity to a different wall in Dallas?
Moving a vanity to a different wall costs $1,300 to $3,300 when you factor in routing new supply lines and drains, patching the old wall, and installing the new unit. The plumbing portion alone typically runs $500 to $1,800 depending on slab versus pier-and-beam access. If you are planning this kind of change, a free measurement and estimate from (432) 302-8761 will give you a real number before you commit.
Get a Written Price on Your Dallas Vanity Installation
A vanity installation should not come with guessing. You should know the exact dollar figure, the exact scope of work, the exact products going into your bathroom, and the exact terms of the guarantee before any work begins. That is the way Mason Remodeling Co Dallas has operated since 2004, and it is the reason homeowners across Dallas keep our number on file for the next project.
When you call (432) 302-8761, a live person answers. You will not press through a call tree, leave a message on a machine, or wait until Monday morning for a callback. You will speak with a real person who can schedule a measurement visit, walk through your options, and get you a written price. The estimate is free, the price is written, the crew is verified by name and photo before arrival, and the work is covered by the 365-Day Done Right Promise. That is the full package, in writing, every time.
If you are still comparing options, take a look at our Bathroom Vanity Installation in Dallas page for more details on the process, and read the home page to see the full scope of what Mason Remodeling Co Dallas does across the metroplex.
Pricing reflects the Dallas market as of 2026. Mason Remodeling Co Dallas offers free estimates – call (432) 302-8761.
Written by Isaac Pruett, Owner at Mason Remodeling Co Dallas, serving Dallas since 2004.
What Our Customers Say
"Basement refinish with egress window. Drywall finish is smooth and the electrician was tidy."
- Kyle S."Opened up the wall between kitchen and dining room. They handled the beam and permit and the floor transitions look seamless."
- Wendy A."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H.
