Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Dallas?
Aluminum fence installation in Dallas typically costs between $4,000 and $10,000 for a standard residential project, with most homeowners paying around $6,500 for roughly 150 to 200 linear feet including materials, labor, and one or two gates. The price per linear foot lands between $28 and $52 installed, depending on fence height, grade of aluminum, terrain, and whether you’re working on flat ground or dealing with rocky North Texas soil. A basic 100-foot backyard fence with no gates may run as low as $2,800, while an ornamental perimeter fence with custom gates, decorative post caps, and steep grade changes can push past $12,000.
Expect to pay a premium for taller fence panels (5 to 6 foot), heavier-duty aluminum grades, and access challenges. Dallas’s clay-heavy soil expands and contracts through wet and dry seasons, which is why proper post depth and concrete footing work matters more here than in sandy coastal markets. Aluminum resists rust far better than steel or wrought iron in humid springs and summer downpours, making it a popular choice across neighborhoods like Lakewood, Preston Hollow, and North Oak Cliff where fences face full sun, sprinkler overspray, and occasional flooding.
Aluminum Fence Installation Cost Breakdown (2026)
Here’s how the numbers shake out for a typical Dallas residential installation. These ranges reflect current market pricing as of 2026 and include both materials and labor, but exclude any demolition or haul-away of an existing fence unless noted.
| Line Item | Low End | Typical | High End |
|---|---|---|---|
| Aluminum fence panels (per linear foot, materials only) | $18 | $27 | $40 |
| Installation labor (per linear foot) | $10 | $14 | $22 |
| Total installed (per linear foot) | $28 | $41 | $52 |
| Single gate (4 ft walk gate, including hardware) | $250 | $400 | $700 |
| Double gate (10 ft drive gate) | $600 | $1,000 | $1,800 |
| Post installation (per post, set in concrete) | $45 | $65 | $110 |
| Old fence removal and disposal (per linear foot) | $4 | $7 | $12 |
| Standard project total (150 to 200 linear feet, one gate) | $4,000 | $6,500 | $10,000 |
What pushes a quote toward the top of that range? Grade changes are the biggest one. Dallas yards in areas like Lake Highlands and East Dallas often slope toward creeks and drainage channels, which means stepped panels or racked installation, extra post work, and more labor hours. Rocky soil in the western parts of the metro, around Grand Prairie and Arlington, can slow concrete footing excavation and add drilling time. Custom powder coat colors beyond standard black, white, or bronze also carry upcharges, as do decorative post caps, finials, and ornamental scrollwork.
Aluminum grade matters more than most people expect. Residential-grade aluminum panels with thinner gauge pickets and rails run cheaper, but they dent faster in hail storms, which are a real concern in Dallas. Commercial-grade aluminum with thicker wall sections holds up better to impact and costs 25 to 40 percent more. Hail season from March through May is not kind to light-gauge metal fencing. If your fence faces an alley or a busy sidewalk, pay for the heavier grade up front.
What Affects Aluminum Fence Installation Pricing in Dallas
- Linear footage and layout. More fence means more material and more labor, but the price per foot often drops slightly on longer runs because setup, mobilization, and equipment costs spread across more panels. A small 60-foot side-yard fence may cost $2,200 total, while a 300-foot perimeter fence lands closer to $12,000 to $15,000.
- Fence height and panel style. Standard 4-foot aluminum fence runs $28 to $38 per foot installed. Five-foot and six-foot panels, which Dallas homeowners often choose for pool enclosures or privacy screening, add $5 to $12 per foot. Flat-top residential panels cost less than spear-top ornamental designs, and arched panels fall in between.
- Number and type of gates. Each walk gate adds $250 to $700. A double drive gate capable of handling a vehicle adds $600 to $1,800 depending on width, hardware quality, and whether you want an automated opener. Gate hardware is where cheap quotes get sneaky – low-end hinges and latches sag within two years in Dallas heat.
- Soil and terrain conditions. Dallas sits on expansive clay soil, known locally as blackland prairie soil, which swells when wet and cracks when dry. Posts need to be set 24 to 30 inches deep with proper concrete collars, and crews often hit limestone or caliche layers at 12 to 18 inches in neighborhoods like Kessler Park and parts of White Rock. Drill time adds labor cost. Sloped yards requiring racked or stepped panels add 15 to 25 percent to the labor line.
- Permit requirements and HOA rules. The City of Dallas requires a fence permit for new installations and major replacements, and the permit fee is based on project valuation. If you live within a historic district such as Swiss Avenue or the M Streets, your design may need approval that specifies material type, color, and height. HOA communities in areas like Plano, Frisco, and McKinney often mandate specific aluminum grades and styles, which can lock you into a higher material tier.
- Tear-down of the existing fence. If you’re replacing a rotted cedar fence or an old chain-link fence, budget $4 to $12 per linear foot for demo and disposal. Some crews include haul-away in the quote, others charge separately. Ask before signing.
Aluminum vs. Other Fence Materials: Dallas Cost Comparison
Aluminum fence pricing sits above wood and chain-link, but below iron and composite. Here’s how it compares per linear foot installed in the Dallas market:
- Chain-link: $12 to $22 per foot. Cheapest option, minimal privacy, common in rental properties and commercial lots.
- Cedar or pressure-treated wood: $18 to $38 per foot. Lower upfront cost, but Dallas summers and termite pressure mean replacement every 8 to 12 years.
- Vinyl fence: $22 to $45 per foot. Low maintenance and clean-looking, but vinyl panels can warp in sustained 100-plus-degree heat and get brittle with age. Vinyl fence installation for a full yard runs $3,500 to $9,000 in Dallas.
- Aluminum fence: $28 to $52 per foot. The sweet spot for a clean look that doesn’t rot, rust, or need repainting.
- Wrought iron: $45 to $80 per foot. Stronger than aluminum but prone to rust in humid Dallas springs, and much heavier to install.
- Composite fence: $35 to $60 per foot. Durable and low maintenance, but limited style options and fewer local installers who stock it.
For most Dallas homeowners, aluminum wins on the 10-year cost curve. It costs more up front than wood, but there’s no staining, no sealing, no board replacement after a hailstorm, and no termite call. Powder-coated aluminum holds its color for 15 to 20 years in direct Texas sun, while wood fences start to gray and warp within three seasons.
How Long Does Aluminum Fence Installation Take in Dallas?
A standard 150-to-200-foot aluminum fence with one or two gates takes one to three days for a professional crew. Day one typically covers layout, post-hole digging, concrete setting, and post placement. Day two covers panel installation, gate hanging, and hardware adjustment. Larger perimeter jobs or projects with extensive concrete demolition can stretch to four or five days.
Concrete needs 24 to 48 hours to cure before panels hang on the posts, so if your crew sets posts on a Tuesday, panels likely go up Wednesday or Thursday. Dallas’s summer heat actually helps here since concrete cures faster in warm weather, though crews usually start earlier in the day to avoid the worst afternoon temperatures. Rain, which is unpredictable in spring and fall, can delay the schedule by a day or two. Snow and ice are rare enough that they rarely affect fencing timelines, but February cold snaps can postpone concrete work.
Dallas Aluminum Fence Installation: What You Get for Your Money
When you hire a fence installer in Dallas, the quote should include more than panels and posts. Here’s what a complete job covers:
- Site evaluation and measurement. A real quote requires someone to walk the property line, check for utilities, and look at grade changes. If a company quotes over the phone without seeing the yard, the number will change on install day.
- Utility line marking. Texas law requires calling 811 before digging. The locate service is free, and any legitimate installer schedules this before day one.
- Post-hole digging and concrete footings. Posts should be set 18 to 30 inches deep, depending on fence height and wind load, with concrete collared around each post for stability in clay soil.
- Panels, rails, and pickets cut to fit. Aluminum panels come in standard 6-foot sections, but any competent installer trims and adjusts for property lines, gates, and corners rather than forcing panels to fit.
- Gate hardware and alignment. Self-closing hinges and gravity latches on pool fences are required by Dallas building code for pool safety compliance. Your installer should know this without being told.
- Cleanup and haul-away. Old fence material, concrete scrap, and packing debris should leave the property. Confirm whether haul-away is included in your written quote.
Mason Remodeling Co Dallas delivers a written price before any work starts, on every project, every time. That price covers the full scope listed above, and it doesn’t change when the crew hits a surprise in the soil. No verbal estimates that grow on the final bill.
How to Save on Aluminum Fence Installation in Dallas
You don’t need a bare-bones fence to keep the price reasonable. Here are practical ways to reduce cost without ending up with a fence you regret:
- Get three written quotes in the same season. Fence pricing in Dallas shifts with demand. Contractors are busiest in spring and early summer, which means March through June quotes often run 10 to 20 percent higher than fall or winter pricing. If you can wait until October or November, you’ll likely land better rates and faster scheduling.
- Keep the layout simple. Long straight runs cost less per foot than designs with multiple 90-degree corners, radius panels, or extensive stepped sections. If your yard is a rectangle, keep it a rectangle.
- Limit gate quantity. Gates are the single biggest add-on line item. One 4-foot walk gate beats two. If you need a drive gate, a single 10-foot steel-framed aluminum gate costs less than a double 12-foot configuration.
- Choose standard heights and colors. Four-foot and five-foot panels in standard black or bronze are the cheapest to source. Custom heights, unusual colors, and special-order finishes add lead time and cost.
- Demolish the old fence yourself, only if it’s simple. Removing an old chain-link fence is a realistic weekend project for a handy homeowner and saves $4 to $12 per foot in demo and disposal charges. Wood fences with set posts are harder, and anything involving concrete footings is better left to the crew.
- Bundle with other projects. If you’re already planning driveway work, a paver patio, or any remodel, fencing contractors often trim their per-foot rate when they’re mobilizing for a larger job anyway. Mason Remodeling Co Dallas handles aluminum fence installation alongside broader home improvement scopes, which is where bundling saves real money.
For an accurate written estimate on aluminum fence installation, call Mason Remodeling Co Dallas at (432) 302-8761. Estimates are free, and you’ll get a specific number, not a vague range.
Aluminum Fence Installation Permits in Dallas: What to Know
The City of Dallas requires a fence permit for any new fence over 4 feet tall or any fence replacement that changes height, material, or location. The permit application needs a site plan showing property lines, existing structures, and the proposed fence layout. If you’re installing a pool fence, additional safety requirements apply, including minimum 4-foot height, self-closing gates, and latch placement that small children can’t reach.
HOA communities across the Dallas metro, including parts of Richardson, Carrollton, Garland, and Mesquite, often have their own fence standards that go beyond city code. Some HOAs mandate specific aluminum panel styles, powder-coat colors, or height limits, and failing to get design approval before installation can mean tearing the fence out at your own expense. A good installer checks HOA requirements during the quoting phase, not after the panels are on the truck. Isaac Pruett, owner at Mason Remodeling Co Dallas, has handled enough Dallas-area fence projects to know which neighborhoods need what before the first post goes in the ground.
Is Aluminum Fence Installation Worth the Cost in Dallas?
Yes, for most homes in the Dallas market. Aluminum fence installation costs $4,000 to $10,000 for a typical residential project, which lands in the middle of the fence pricing spectrum. You pay more than wood or chain-link up front, but you skip a decade of rot repair, termite treatment, staining, warping, and board replacement that wood demands in North Texas. Aluminum doesn’t rust the way iron does, and the powder coat finish holds up through hail, full sun, and sprinkler overspray.
Dallas homes with aluminum fencing also see stronger curb appeal, especially in neighborhoods like Forest Hills, Merriman Park, and Casa Linda where ornamental metal fencing is common and expected. If you plan to sell within five to seven years, a clean aluminum fence reads as an upgrade rather than a maintenance item. If you plan to stay longer, it’s a one-time cost that locks in security and property definition for two decades.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per foot in Dallas?
Aluminum fence installation in Dallas runs $28 to $52 per linear foot installed, including panels, posts, concrete, labor, and basic hardware. Most standard residential projects fall between $35 and $45 per foot for 4-foot or 5-foot panels on flat ground with standard gating.
Call (432) 302-8761 for a written per-foot quote on your specific fence line. Estimates are free, and you’ll know the exact cost before you commit.
Is aluminum fence cheaper than wrought iron in Dallas?
Yes. Aluminum fence installation runs $28 to $52 per foot in Dallas, while wrought iron runs $45 to $80 per foot. Aluminum is lighter, faster to install, rust-resistant, and offers a similar ornamental look at roughly 40 to 60 percent lower total project cost. Iron requires regular rust treatment and repainting in humid Dallas springs, which adds long-term maintenance expense that aluminum avoids entirely.
Couples and families who want the iron look without the upkeep choose aluminum. Call (432) 302-8761 to compare aluminum and iron options with a free written quote.
How much does it cost to install an aluminum fence around a pool in Dallas?
Pool fence installation in Dallas typically costs $3,500 to $8,000 for an average residential pool perimeter, running $30 to $50 per foot for code-compliant 4-foot or 5-foot aluminum panels with self-closing gates and child-safe latches. Dallas building code sets specific requirements for pool barrier height, gate operation, and latch placement, and the number of gates on the pool deck affects the total significantly.
For a written pool fence quote that includes all code-required hardware, call (432) 302-8761. We’ll walk the site and give you an exact number.
Can you install an aluminum fence in the winter in Dallas?
Yes, and it’s often cheaper. Aluminum fence installation slows down in January and February, which means Dallas contractors typically quote 10 to 20 percent lower than spring pricing. Concrete still cures fine during mild Dallas winters, and the soil is often easier to dig when temperatures are moderate rather than in the middle of a hard summer dry spell. If you can schedule between December and February, you’ll likely save money and get scheduled faster.
Call (432) 302-8761 to get a winter-rate written estimate for your aluminum fence project.
Does aluminum fencing rust in Dallas?
No. Aluminum fencing does not rust, which is the main reason it outperforms iron in Dallas’s humid, rain-prone climate. The powder-coat finish protects the metal from oxidation, and even if it gets scratched, the aluminum underneath won’t corrode like steel or iron. A quality aluminum fence in Dallas holds its appearance for 15 to 20 years with no more maintenance than occasional washing.
For an aluminum fence installed to Dallas conditions and backed by a written guarantee, call (432) 302-8761 for a free estimate.
Why Dallas Homeowners Choose Mason Remodeling Co for Aluminum Fence Installation
Fence installation is a straightforward job until it isn’t. The crew shows up, and you’re expected to trust whoever walks through the gate. Mason Remodeling Co Dallas does things differently. Before the visit, you receive the technician’s name and photo, and when the crew arrives, each member shows a photo ID badge at the door. Every technician passes a background check and arrives in a clean, marked uniform. That’s the Threshold Standard, and it’s not optional.
Isaac Pruett founded our Dallas operation on a simple principle that applies to every job, from fence installation to whole-home remodels: put the price in writing before work starts. Every aluminum fence project gets a written quote that includes materials, labor, gates, hardware, concrete, and cleanup. No surprise invoices. If something fails within the first year, our 365-Day Done Right Promise covers the fix at no cost to you. We serve the entire Dallas area, from Oak Cliff to Preston Hollow to East Dallas and everywhere between. We’re also your full-service aluminum fence installation partner in Dallas for projects of any size.
Pricing reflects the Dallas market as of 2026. Written by Isaac Pruett, Owner at Mason Remodeling Co Dallas, serving Dallas since 2004. Mason Remodeling Co Dallas offers free estimates – call (432) 302-8761.
What Our Customers Say
"Opened up the wall between kitchen and dining room. They handled the beam and permit and the floor transitions look seamless."
- Wendy A."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L.
