Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Owens Corning Construction
Mason Remodeling Co Dallas provides independent Dallas Owens Corning service across Dallas, TX, with a focus on roof repair, full roof replacement, and storm damage recovery. We are not an Owens Corning dealer or authorized rep, and we don’t pretend to be. What we are is a Dallas crew that has torn off, patched, and reinstalled enough Owens Corning Duration and Oakridge shingles to know exactly how they fail in North Texas heat, hail, and wind, and what it takes to fix them so they stay fixed. If you need Owens Corning roofing work in Dallas, call (432) 302-8761 for a free estimate with a written price before any work begins.
Why Trust Mason Remodeling Co Dallas for Your Owens Corning Construction?
Isaac Pruett, owner of Mason Remodeling Co Dallas, has spent more than two decades in construction, and he still walks every job himself before the first nail goes in. That habit came from early years running jobs across Southern California, where he learned that a plan on paper and a roof in front of you are two different things. Since bringing that same methodical approach to Dallas, he and his crew have worked steadily from Oak Cliff to the design districts near the Dallas Market Center, and they have seen what Owens Corning shingles do when a Texas hailstorm hits them at 60 miles per hour.
Our technicians work on Owens Corning products daily. That matters because a roofer who only occasionally touches Duration or Oakridge shingles will not recognize the difference between surface granule loss and a shattered fiberglass mat underneath. We do. We also carry OEM-compatible sealants, starter strips, and ridge caps for common Owens Corning lines, and we know the local Dallas wind and hail codes that govern how those shingles get nailed down. Every job includes a written price before we start and a written guarantee that states exactly what is covered and for how long.
Styles & brands we work with
Common Owens Corning Construction Problems We Fix in Dallas
- Hail damage that cracks the fiberglass mat beneath the granules on older Supreme® shingles. The top surface can look fine while the structural mat below is fractured. We see this constantly in Dallas after spring and fall hailstorms. The fix usually requires replacing the affected slopes, not just resealing a few tabs.
- Wind uplift on improperly nailed Duration® shingles along roof edges and ridges. Duration shingles carry a high wind rating, but only when installed with the correct nail pattern and count. In Dallas spring storms, we regularly find edges that were under-nailed during the original install. The shingles lift, crease, and tear. Repairs involve resecuring the perimeter and replacing any shingles that have lost their seal strip.
- Thermal splitting and granule loss on south-facing roofs. Dallas summers push roof surface temperatures well past 140 degrees, and the constant expansion and contraction causes Owens Corning shingles on south and west slopes to dry, crack, and shed granules faster than shadier slopes. Homeowners often mistake this for hail damage. It is not. It is heat cycling, and it is the most common call we get from Lakewood and Casa Linda.
- Moisture trapped under Owens Corning underlayment from inadequate attic ventilation. Owens Corning underlayment does its job, but if the attic is not moving enough air, condensation collects beneath it. Over time that moisture rots the decking and loosens shingles from below. We diagnose this by checking attic airflow before recommending a repair or replacement.
- Discontinued color matching on Oakridge® shingles. Owens Corning periodically retires color lines. When only part of a Dallas roof needs repair, matching an older Oakridge color becomes a real problem. We keep a library of samples and know which current production colors blend closest with discontinued ones, and we will be honest when a full replacement is the only way to avoid a two-tone roof.
Owens Corning Parts & Our Repair-vs-Replace Approach
We recommend genuine Owens Corning OEM shingles, starter strips, and underlayment for any full roof replacement. The shingle color, granule blend, and wind rating are spec’d to work together, and substituting aftermarket materials can void the manufacturer’s wind warranty. For repairs on current production lines like Duration and Oakridge, we source OEM components whenever possible. For older discontinued Owens Corning lines, we match with top-tier aftermarket products that meet or exceed Dallas wind and hail standards. We will tell you which path we are taking and why.
Our repair-vs-replace decision is simple. If damage is isolated to a few tabs or a single penetration, we repair. If the fiberglass mat is shattered across multiple slopes, the decking is compromised, or the roof is nearing the end of its service life, we recommend replacement. We do not sell a new roof for a few bruised tabs. Call (432) 302-8761 if you want an honest assessment.
Our Owens Corning Service Process – Step by Step
- 1
Diagnosis. We walk the roof, inspect the attic, and document every sign of damage, from granule loss to mat fractures to lifted edges. We take photos and show you what we found, in plain English.
- 2
Written price. Before any work starts, you get a written line-item price. Not a verbal estimate that grows later. The number we hand you is the number you pay, unless you ask us to add scope.
- 3
Repair or replacement. We install Owens Corning products to the manufacturer’s specs and Dallas code, including correct nail pattern, starter strips, and hip-and-ridge caps where the job calls for them. For storm damage, we document everything for your insurance claim.
- 4
Test and verify. We check seal strips, fastener depth, and water-shedding before we leave. Then we walk the roof with you and answer questions.
- 5
Written guarantee. Every project gets a written guarantee stating coverage terms plainly, including what is covered, what is excluded, and for how long. Our 365-Day Done Right Promise applies: if the work is not right within a year, we make it right at no cost to you.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Products We Service & Install in Dallas
We install and repair the full Owens Corning residential roofing lineup in Dallas, with the most work on Duration® shingles, Oakridge® shingles, and TruDefinition® Duration FLEX® for high-wind areas. We also handle repairs on older Supreme® shingles, though we will be direct about when that line has reached the end of its useful life. We stock common Owens Corning starter strips, ridge caps, and underlayment locally, which speeds up repairs when the next storm rolls through. For replacement jobs, we order the exact Duration or Oakridge color that matches your existing roof or your preferred new look.
We Also Service These Brands
Mason Remodeling Co Dallas works across the home as your General Contractor, not just on the roof. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, which means you can handle a kitchen remodel and a roof repair with one crew you already trust. One written price, one guarantee, one phone number.
FAQs – Owens Corning Construction Service in Dallas
Duration shingles use a thicker fiberglass mat that resists full fracture better than budget shingles, but Dallas hail can still shatter that mat beneath an intact granule surface. The damage hides. Cheaper shingles typically show obvious granule bruising and cracking, while Duration roofs often need a close inspection with the tabs lifted to see the real damage. Call (432) 302-8761 for a free inspection after any hailstorm.
Often yes, if the color is still in production. If Owens Corning has discontinued the color, we can usually find a close match among current production lines, but we will show you samples and let you decide. Sometimes the only way to avoid a visible patch is replacing the entire slope, and we will tell you that before you spend anything. Call (432) 302-8761 for an exact quote.
Thermal cycling. Dallas south-facing slopes bake in summer heat and cool quickly at night, and the repeated expansion and contraction eventually dries the asphalt and splits the shingle. This is not a manufacturing defect. It is a Texas climate reality, and it is why proper attic ventilation and correct nailing matter so much on south and west exposures.
We install Owens Corning underlayment on Owens Corning roof replacements because the shingle and underlayment are tested as a system, and mixing brands can affect the manufacturer’s wind and limited warranty. For repairs on older Owens Corning roofs, we use compatible underlayment that meets or exceeds Dallas code. We will explain what we are using and why.
Dallas follows the Texas wind load standards, which require six nails per shingle for most steep-slope roofs, with the exact pattern set by Owens Corning for each product line. Under-nailing is one of the most common original-install mistakes we find on wind-damaged roofs across Dallas. We nail to the manufacturer’s spec, not the minimum the code will allow.
How much does Owens Corning construction cost in Dallas?
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Standing Seam Metal Roof | $15,000 – $40,000 |
Those are real Dallas numbers, and the final figure depends on roof size, pitch, decking condition, and the Owens Corning line you choose. Call (432) 302-8761 for a line-item written quote before any work starts.
Book Your Owens Corning Service in Dallas, TX
You should know who is coming, what it costs, and what happens if something goes wrong before we ever pick up a tool. Call (432) 302-8761 for a free Owens Corning roof estimate in Dallas, and we will put the price in writing before any work begins.
Written by Isaac Pruett, Owner at Mason Remodeling Co Dallas, serving Dallas since 2004.
