Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Dallas Owner’s Guide
If you have a KraftMaid vanity, cabinet, or bath storage piece that’s failing, we can match it, replace the damaged parts, and handle the full remodel around it. A KraftMaid bathroom remodel in Dallas typically runs $9,000 to $28,000 installed, depending on scope; a straight vanity or cabinet component swap starts much lower. Most Dallas homeowners discover the problem the same way: a drawer front comes loose, a hinge tears out of the frame, or the finish starts peeling after years of Texas humidity cycling through an under-ventilated bathroom.
Which KraftMaid Models This Applies To
KraftMaid builds across several cabinet lines, and the bathroom pieces usually come from the same series as the kitchen catalog: base vanities, wall cabinets, linen towers, and open-shelf units. The model label is typically on the inside face of a drawer box or the back of a door panel, and it matters because KraftMaid has shifted door profiles and hinge drilling patterns between generations. The single biggest compatibility gotcha we see in Dallas is hinge spacing: older KraftMaid doors were drilled for 35mm cup hinges at one reveal depth, while newer doors run a shallow-bore pattern. A hinge that looks right in a photo will bind or gap when you try to mount it on the wrong generation. If the finish is the only problem, we often replace the door and drawer fronts rather than the boxes; if the box has swelled from water exposure, the whole section gets pulled and reordered to match the kitchen or adjacent bath cabinetry.
Mason Remodeling Co Dallas is an independent contractor and not affiliated with KraftMaid, but we order and install their components regularly and know which parts are still in production versus discontinued. When an OEM part is no longer available, we use quality aftermarket equivalents that match the bore pattern and finish code, and we tell you the difference before we order.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer fronts sag or won’t close flush. The undermount slides have worn, or the drawer box has absorbed enough humidity to lose its square. In a Dallas bathroom with a daily shower cycle, that happens faster than people expect.
- Hinges tear out or the door drops. This is usually the particleboard frame around the hinge cup finally giving out. The door is still fine; the mounting point is not.
- Finish peeling or blistering near the sink or tub. Water sits on the toe kick or the bottom rail, and the clear coat starts separating. KraftMaid’s older thermofoil doors are more prone to this than their painted wood lines.
- Soft-close feature stopped working. The damper inside the hinge or slide has blown. Sometimes the fix is a ten-dollar part; sometimes the hinge is obsolete and the door needs to be redrilled.
- Vanity cabinet floor is spongy or stained. The base has been wicking water from a slow drain leak. By the time you can feel it, the box is usually done.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If it’s a single component (one door, one drawer front, one hinge set), the job is small and priced accordingly. But because you’re asking about a bathroom remodel around KraftMaid cabinetry, here are the Dallas numbers we quote from, and they hold across our jobs:
| Scope | Typical Installed Range in Dallas |
|---|---|
| KraftMaid vanity door/drawer front replacement (per piece) | $150 – $450 |
| Bathroom vanity replacement, cabinet only | $800 – $3,000 |
| Small bathroom remodel (keeping existing KraftMaid footprint) | $5,000 – $12,000 |
| Full KraftMaid bathroom remodel | $9,000 – $28,000 |
What moves a job from the low end to the high end is how much of the room changes: moving the vanity location, replacing the shower or tub, tile work, new flooring, and whether we’re updating electrical or plumbing. Every line-item is written down before we start, and the price doesn’t move unless you change the scope. The labor on parts we install is covered by our 365-Day Done Right Promise: if it fails within a year of completion, we come back and make it right, no charge.
DIY or Call Us?
You can safely inspect the piece: open every drawer, look for the KraftMaid label, and check whether the hinges are mounted solid or the screw holes are chewed out. What you should not do is try to re-drill a KraftMaid door with a standard bit, because the hinge cup depth is specific and a too-deep bore will punch through the face. We have seen Dallas homeowners turn a $40 hinge repair into a $200 door replacement that way, and Isaac Pruett will be the first to tell you he has made that exact mistake himself, years ago, and never twice. If the door is warped, the finish is failing, or the hinge mounting points are gone, call us at (432) 302-8761 and we will match the part or tell you honestly when a replacement makes more sense.
FAQs
With normal use and decent bathroom ventilation, KraftMaid vanity boxes last 15 to 25 years in Dallas, though the finish and hinges typically show wear well before the structure fails. Texas heat and humidity cycling are the main accelerants, especially in bathrooms without a functioning exhaust fan. Call (432) 302-8761 and we can assess whether a component replacement or a reorder is the better path.
A swollen base can sometimes be dried out and re-supported, but if the particleboard has delaminated, the structural core is compromised and it will keep degrading even after you fix the leak that caused it. In that case, replacement costs less than fighting it.
We replace a single door or hinge set on-site in under two hours, but a full bathroom remodel with KraftMaid cabinetry usually runs two to four weeks in Dallas, depending on tile, plumbing, and fixture lead times. We will give you a schedule in writing before we start, and we stick to it.
We stock the high-wear items: hinges, soft-close dampers, drawer slides, and mounting hardware on our trucks because those are the parts that fail mid-project and can hold up a whole job. Doors, drawer fronts, and vanity boxes we order direct from KraftMaid with the exact finish code so the match is right.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
