Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Blanco Home Additions & ADU: The Dallas Owner’s Guide
Blanco home additions and ADU construction in Dallas typically run $45,000 to $130,000 for a standard addition, with detached ADUs ranging from $90,000 to $220,000 depending on size, foundation work, and utility connections. We stock and install Blanco-compatible fixtures, sinks, faucets, and accessory components across most contemporary Blanco series lines, and we can usually match your existing hardware within one visit. Most Dallas homeowners discover they need this work when a Blanco kitchen or bath fixture starts failing inside a space they’re already planning to expand, or when they realize the new ADU needs the same Blanco-compatible rough-in components as the main house.
Here’s the reality we see across Dallas neighborhoods from Lake Highlands to Oak Cliff: the addition itself is the big-ticket item, but the Blanco components you choose for the new kitchen or bath are what you’ll touch every single day. Getting the rough-in right the first time, matched to Blanco’s spec sheets, saves you a second demolition later. Isaac Pruett has walked hundreds of Dallas job sites before the first nail goes in, and the additions that hold up best are the ones where the Blanco specifications were locked down before framing began.
Key takeaways:
- Installed home addition pricing in Dallas: $45,000 – $130,000; ADU construction: $90,000 – $220,000
- We match Blanco series compatibility before any rough-in work starts
- Written price before work begins, every time, no exceptions
- 365-Day Done Right Promise: if it’s not right within a year, we make it right at no cost
- Call (432) 302-8761 and a live person answers, 24/7
Which Blanco Models This Applies To
Blanco’s current North American lineup includes the Silgranit composite sink series (Precis, Diamond, Performa), the Ikon and Culina stainless steel lines, and the Zerox and Urban bar/prep sink families. If you’re adding a kitchen or ADU wet bar, we’ll confirm your existing sink model number, which is stamped on the underside of the bowl on most Silgranit units and on the mounting flange on stainless models. That number determines the cutout template, drain assembly type, and whether you need Blanco’s standard 3.5-inch strainer or the narrower 2-inch bar sink drain.
One compatibility gotcha we see often in Dallas: Blanco’s Silgranit sinks from 2015 and earlier used a slightly different drain collar thread pitch than current production. Homeowners hand-me-down an old sink into a new ADU and find the drain basket doesn’t seat. We keep both thread patterns on hand and can tell you within a minute which one your sink takes. For OEM versus aftermarket, our honest position is this: for drain assemblies, mounting clips, and faucet escutcheons, quality aftermarket works fine if the material is 304 stainless or solid brass. For anything that touches the sink bowl itself, like a cutout template or undermount bracket set, OEM is worth the premium because the Silgranit material is unforgiving if the bracket geometry is off by even an eighth of an inch.
If you’re building an ADU with a Blanco faucet (the Culina, Linus-S, or Solenta lines), we’ll match the rough-in valve depth to Blanco’s published spec so the finished trim sits flush. Dallas water pressure runs around 45 to 60 psi in most neighborhoods, which is within Blanco’s operating range, but older blocks near East Dallas with galvanized supply lines can dip lower, and that changes which aerator insert makes sense.
Styles & brands we work with
Signs Your Blanco Home Additions & ADU Is Failing
Most of what goes wrong with Blanco fixtures inside Texas additions and ADUs is catchable early, if you know what you’re looking at. Here’s what we commonly find on service calls across Dallas:
- Persistent dampness under the sink cabinet: Almost always the drain collar gasket has hardened and lost its seal. Dallas attics and garages hit 120-plus degrees in August, and repeated heat cycles turn rubber gaskets brittle faster than in cooler climates.
- Sink basin flexes or creaks when you press down on it: The undermount brackets have loosened. Silgranit is rigid, so flex usually means a bracket backed out or was never torqued to spec during the original install.
- Faucet drips from the base, not the spout: The o-ring on the cartridge housing has failed. Blanco faucets use cartridge systems rated to about 15 to 20 years, but hard water scaling in Dallas (much of the city runs 120 to 180 mg/L calcium carbonate) shortens that considerably.
- Mineral staining that won’t come out of a Silgranit bowl: This isn’t really a failure, it’s a maintenance clue. Blanco recommends a dedicated cleaner for Silgranit, and using abrasive scouring powder voids the surface finish. We see this a lot in ADUs where a tenant used whatever was under the sink.
- Slow draining in a new ADU kitchen: This is usually not the sink. It’s the vent: too many Dallas ADUs are plumbed with an S-trap or under-vented drain, which is against Dallas Plumbing Code and causes the slow drain you don’t have in the main house.
Replacement Cost & What’s Included
If you’re replacing a failed Blanco component as part of a larger Dallas home addition, the Blanco-specific line items are small relative to the whole job. Here’s what we quote for the fixture work itself:
- Blanco Silgranit sink replacement (labor included): $600 – $1,200 installed, depending on whether we’re reusing the existing cutout or modifying the countertop
- Blanco faucet replacement or rough-in valve service: $350 – $800 installed, including cartridge replacement and pressure test
- Drain assembly and gasket replacement: $125 – $250 installed, parts included
- Undermount bracket re-torque or replacement: $150 – $350, depending on access
Those Blanco fixture numbers sit on top of the addition or ADU construction scope, which in Dallas runs $45,000 to $130,000 for additions and $90,000 to $220,000 for detached ADUs. What drives the range on the big number is foundation type (pier-and-beam adds complexity versus slab), whether you’re tying into existing HVAC or adding a mini-split, and how far the new plumbing runs from the main stack. We give you a written line-item price before any work begins, and that number does not change unless you change the scope. The workmanship warranty runs 365 days from completion, in writing, with a free return visit if anything fails.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a Blanco drain gasket or swapping a faucet cartridge is within reach of a careful homeowner with basic tools, and we’ll tell you that straight. Shut off the water, take photos as you go, and you’ll probably be fine. What you should not attempt yourself is anything involving the gas or electrical rough-in for an ADU, any load-bearing wall removal for an addition, or any plumbing work inside a wall cavity. Dallas requires permits and inspections for structural and MEP work, and a DIY remodel that skips that step can come back on you at resale or when an insurance claim gets denied.
Where DIY really goes sideways with Blanco specifically is the undermount re-bracket job. The Silgranit material is heavy, and if a bowl drops while you’re re-seating it, you’re buying a new sink and probably a new countertop. We’d rather you call us at (432) 302-8761 and let us put it in writing before we touch a wrench.
FAQs
A Blanco Silgranit sink should last 25 years or more with normal use; what fails first in Dallas is the drain gasket and faucet cartridges because hard water and heat cycles age the rubber and plastic components faster than the sink itself. If your sink bowl is cracked or deeply stained beyond cleaning, replacement is the better call. Call us at (432) 302-8761 and we’ll assess it on site.
In about half of cases, yes: a leaking drain collar usually just needs a new gasket, which is a $20 part and thirty minutes of labor. If the collar itself is cracked or the threads are stripped, replacement is the only reliable fix, and we stock both OEM and quality aftermarket options for that same visit. We’ll quote you the exact repair before we start.
A straight sink swap where we’re reusing the existing countertop cutout takes about two to three hours start to finish; a faucet replacement with cartridge change runs one to two hours. If the countertop needs modification to fit a different Blanco model, that adds a day and depends on countertop material. We’ll give you a written time estimate up front.
We stock the most common Blanco drain assemblies, mounting bracket sets, and faucet cartridges on our trucks, and we can order any Blanco-specific component with a typical five to seven day lead time. We also keep compatible components for KraftMaid, Cambria, and Silestone products for Dallas addition jobs that mix brands. If your part has a five-day lead time, you’ll know that before you commit.
Call Mason Remodeling Co Dallas
You should know who is coming, what it costs, and what happens if something goes wrong before we ever pick up a tool. That’s how this works. Every crew member is background-checked, identity-verified, and introduced to you by name and photo before they arrive, wearing a clean uniform and a photo ID badge at your door. Call (432) 302-8761 and a live person answers. You’ll get a written price before any work starts, on every Blanco addition or ADU project, every time.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
