A Mason company - serving Dallas, TX
An open living room and dining area after a whole-home remodel

Owens Corning Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Dallas
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roofing: The Dallas Owner’s Guide

Owens Corning roofing replacement in Dallas typically runs $8,000 to $20,000 for a full tear-off and re-roof, while targeted repairs on Owens Corning shingle systems usually land between $400 and $1,800. Most homeowners discover they have a problem the hard way: a leak shows up on the bedroom ceiling after a spring hailstorm, or granules start collecting in the gutters faster than leaves. We stock Owens Corning-compatible materials and can usually schedule a repair within a few days of the initial inspection. If you’re seeing water where it shouldn’t be, call (432) 302-8761 and we’ll walk you through what you’re looking at before we ever send a truck.

Call (432) 302-8761

Owens Corning is one of the three roofing lines we work with regularly, alongside GAF and CertainTeed. We’re an independent Dallas contractor, not an Owens Corning dealer or corporate affiliate, which means we tell you the truth about what your roof needs without pushing one brand over another.

Which Owens Corning Models This Applies To

A remodeled family room with new windows and a window seat

Owens Corning splits its shingle lines into three main families: the Oakridge series (their mid-range architectural shingle), the Duration series (their heavier architectural line with SureNail technology), and the TruDefinition series (the premium color-through architectural shingle). The part that fails on a Dallas roof is almost always the shingle itself, not some hidden component. Hail cracks the fiberglass mat, wind lifts the seal strip, and the Texas sun bakes the asphalt until it gets brittle and starts shedding granules.

Here’s the compatibility gotcha most Dallas homeowners don’t know: Owens Corning changed the seal strip configuration on Duration shingles several years back. If your roof was installed before roughly 2015, older-stock Duration shingles may not lock down properly against newer production runs. That matters for spot repairs. You can’t just grab any Duration shingle off a shelf and expect it to seal like the original. We match by tearing off a sample and checking the back of the shingle for the production code before we ever order material.

When it comes to OEM versus aftermarket, Owens Corning shingles aren’t really a part-swap item like a faucet cartridge. The roofing components that matter most are the accessories: ridge cap shingles, starter strips, leak barrier, and underlayment. You can absolutely use a quality aftermarket synthetic underlayment under Owens Corning shingles and get better performance than the entry-level felt Owens Corning bundles in some packages. We stock Owens Corning ridge cap and starter in the truck for repairs, and we use synthetic underlayment on every full replacement.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Owens Corning Roofing Is Failing

  • Granules in the gutters. Owens Corning shingles shed granules as they age, but if you’re scooping out handfuls every fall, the asphalt is oxidizing faster than it should. That’s usually UV damage from the Dallas sun doing its slow work, and it means the shingles are losing their protective top layer.
  • Curled or cupped shingle edges. Heat and moisture cycles make the corners of architectural shingles lift. Once the corners curl, wind gets underneath, and the next spring storm tears them off. We see this constantly in older Lake Highlands and Plano neighborhoods where roofs are pushing twenty years.
  • Ceiling stains after heavy rain. A stain doesn’t always mean the shingles failed directly above it. Water travels along the roof deck and drips wherever it finds a seam. The actual breach could be ten feet away, which is why a quick shingle patch without a full inspection often leaves Dallas homeowners with the same stain two months later.
  • Shingles missing after wind. Owens Corning shingles have a wind rating, usually 110 to 130 mph depending on the line, but that rating assumes the seal strip was properly activated when installed. A roof nailed in cold weather or on a dusty deck sometimes never fully seals, and those shingles lift early.
  • Fiberglass mat showing through. If you can see a white, fibrous layer poking through the colored granules, the shingle surface is gone. That’s the fiberglass reinforcement, and its exposure means the shingle is structurally done. No amount of sealant fixes exposed mat.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary suite with built-in wardrobes and a window seat

A full Owens Corning roof replacement on a typical Dallas single-family home runs $8,000 to $20,000, installed. Repairs on a localized section fall between $400 and $1,800 depending on how many shingles failed, whether the decking underneath is damaged, and how steep your roof is. Steep roofs cost more because the crew works slower and safety equipment is non-negotiable. Two-story homes with complex valleys or multiple roof planes also push toward the top of that range.

Scope Dallas Price Range What’s Included
Targeted shingle repair $400 – $1,800 Shingles, sealant, nails, labor, basic inspection
Section replacement (one roof plane) $2,000 – $5,000 Tear-off, synthetic underlayment, shingles, ridge cap, cleanup
Full roof replacement $8,000 – $20,000 Full tear-off, deck inspection/replacement, underlayment, shingles, flashing, ridge cap, cleanup, permit

Every repair or replacement includes a written line item quote before work begins. No change orders that show up after the fact. Our workmanship warranty runs 365 days from completion, in writing, covering the labor and installation. Owens Corning’s material warranty covers the shingles themselves, and we register every full replacement so you get the full coverage period. We pull permits on full replacements in Dallas and the surrounding cities, and the inspection is scheduled before we start so there’s no waiting game at the end.

DIY or Call Us?

Here’s the honest split. You can safely check your gutters, look for curling edges from the ground with binoculars, and take photos of anything that looks off. That gives us a head start. What you shouldn’t do is climb up with a bundle of shingles and a nail gun. Roof work in Dallas means a hot, often steep surface, and the injuries we hear about from fallers are not minor. It’s also not just about the fall risk. A bad nail placement or a shingle that never seals means you’ve spent a Saturday and still have the same leak. Isaac Pruett has walked enough Dallas roofs to say this plainly: roofing is one of those trades where the “simple fix” usually isn’t, and the cost of getting it wrong shows up inside your house. Call (432) 302-8761 and we’ll do the climbing.

FAQs

A remodeled staircase with wood treads and a slim metal railing

Getting started with Mason in Dallas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Dallas team

A local crew that works across Dallas and the towns around it, to the same written standard as every Mason location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Dallas? Licensed & insured · Free in-home estimates response · free estimates
Call (432) 302-8761
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Mason Remodeling Co Dallas responds fast. No obligation.

By reaching out through this form, you accept our Privacy Policy and agree that you may be contacted by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch