Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Fence Installation: The Dallas Owner’s Guide
Tamko fence installation in Dallas typically runs $3,500 to $9,000 for a complete project, depending on linear footage, gate count, and whether we’re pulling an old fence or starting fresh. If you’ve got a Tamko product that’s warping, splitting, or pulling away from posts, we can usually match the existing style and complete the job in two to four days once materials land. Most Dallas homeowners discover the failure the hard way: a spring storm pushes a section over, a gate starts dragging across concrete, or the bottom of a picket looks like a sponge after three years of North Texas sprinkler overspray.
Which Tamko Models This Applies To
Tamko’s fencing line includes wood-composite pickets, vinyl privacy panels, and post-and-rail systems. The composite boards carry a noticeable weight difference from cheap big-box alternatives, and the locking profiles vary between the solid privacy style and the shadowbox (board-on-board) configuration. To identify what you have, look for the Tamko stamp on the underside of a picket or the inside face of a rail. If the stamp’s worn off, measure the picket thickness: most Tamko composites run 0.75 to 0.95 inches, where economy vinyl runs thinner and feels hollow when you tap it.
We install genuine Tamko-compatible components and quality aftermarket equivalents that match the profile, color blend, and fade rating. For fences older than eight years, we often recommend aftermarket because Tamko changes dye lots over time and a brand-new panel against an eight-year-old one will show the age difference, regardless of the color name on the box. The compatibility gotcha we run into most in Dallas is mixing Tamko’s locking-rail system with off-brand pickets: the locking channel depth is not universal, and an eighth-inch mismatch turns into a panel that rattles in the wind and pops loose inside a year.
Styles & brands we work with
Signs Your Tamko Fence Installation Is Failing
- Warped or bowed pickets. This is the most common call we get in Dallas after a stretch of 100-degree days. Composite expands and contracts with heat, and if the original installer buried the posts without enough gap between pickets, summer expansion buckles the whole run.
- Posts leaning at the base. North Texas clay soil shrinks in drought and swells after rain. A post set in a narrow hole with a single bag of concrete will heave and lean within two or three seasons. We see this constantly in East Dallas and Garland, where the soil is particularly reactive.
- Gate dragging or not latching. Gates fail because the hinge pulls out of the post, the post itself shifts, or the gate was hung wider than the posts could handle. A dragging gate is a security issue, not just an annoyance.
- Chalky or faded surface with hairline cracks. UV exposure breaks down the polymer cap on composite. If the surface scratches with a fingernail, the UV stabilizer is spent, and the board will start absorbing water next.
- Bottom rail separating from pickets. Sprinkler heads aimed at the fence line are the culprit here, along with standing water after Dallas downpours. Once the bottom rail channel widens, pickets drop and the fence loses structural integrity fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Dallas homeowner replacing a failing Tamko fence, the installed range is $3,500 to $9,000. The spread comes down to three things: linear feet (most Dallas lots run 150 to 250 feet of fence line), how many gates you have, and whether the old posts can be reused. Pulling and resetting posts adds $900 to $2,500 depending on count and soil conditions. Every quote we write includes the tear-out, haul-away, new Tamko-compatible materials, concrete, hardware, and labor as one number, not a list of line items that grows on the final bill. You get a written price before any work starts, and the job carries a 365-day warranty from the completion date. If something is not right within that year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things before calling: is the lean at the post or the panel, is the gate hinge pulling out or just loose, and how many sections are actually compromised versus the one you noticed first. A single loose gate latch takes ten minutes and a screwdriver. Replacing a full section of Tamko composite is where Dallas homeowners usually get in trouble. The old rails are set with screws hidden under caps that break when you pry them, the post concrete has to be busted out without hitting sprinkler lines that run along fence lines in most Dallas yards, and the new panels need to be installed with the proper expansion gap or you will be looking at the same bowing problem next August. Isaac Pruett still walks every fence line himself before the first post is pulled, because a fence that looks straight from the kitchen window can be three inches out of line at the property corner. You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool. Call (432) 302-8761 for a free estimate.
FAQs
A properly installed Tamko composite fence lasts 15 to 25 years in Dallas, with the lower end applying to full-sun exposures on west-facing property lines and the higher end to shaded areas. Heat and UV are the real lifespan killers here, not moisture alone. Call (432) 302-8761 and we’ll tell you honestly whether your fence has five years left or needs replacement now.
Yes, if the posts are sound and the damage is limited to a few pickets or one rail, section repair runs $400 to $1,200 depending on how many boards and whether we’re matching an older color lot. If posts are leaning or the rail system is compromised, spot repair is money wasted. We’ll tell you which one you have when we walk the line.
Most Dallas Tamko fence replacements take two to four days from post removal to final gate adjustment, including haul-off of the old fence. Weather is the wildcard: sustained rain or frozen ground adds a day or two. We give you the schedule in writing with the price.
We stock common Tamko-compatible pickets, rail profiles, gate hardware, and post caps on the truck for same-trip repairs. For full fence replacements and color-matched panel runs, we order to spec and you get a confirmed material date before scheduling. Estimates are free; call (432) 302-8761.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
