Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Driveway & Pavers: The Dallas Owner’s Guide
If you have a Boral paver driveway or patio in Dallas and a section has shifted, cracked, or sunk, the fix usually comes down to replacing individual pavers or re-compacting the base beneath them, not tearing out the whole surface. Typical Boral paver repair in Dallas runs $400 – $1,800 for spot replacement of 10 to 60 square feet, while a full paver driveway installation lands between $7,000 and $18,000. Most owners discover the problem after a heavy rain, when water pools in a new low spot or a paver rocks underfoot near the garage apron.
We stock Boral-compatible pavers and the edge restraints, bedding sand, and joint stabilizer that Dallas clay soil demands. Here’s what you need to know before you call anyone, including us.
Which Boral Models This Applies To
Boral’s paver lines that we see most often in Dallas driveways and patios include the Boral Clay Paver series, the Boral Stoneworks concrete paver line, and the Boral Terraçade architectural pavers used on some mid-century modern homes in East Dallas and Lakewood. Each has different thickness specs: Boral clay pavers typically run 2¼ inches thick for pedestrian use and 2¾ inches for driveway-rated applications, while Stoneworks concrete pavers sit at 60mm or 80mm depending on whether they’re rated for foot traffic or vehicle loads.
The compatibility gotcha Dallas homeowners hit: a 60mm paver installed where a driveway needs an 80mm paver. The thinner paver cracks under repeated vehicle weight within two to three seasons, especially on the clay soil we have here that heaves with every wet-dry cycle. If your Boral driveway is failing in a traffic lane but fine elsewhere, check the paver thickness before you let anyone replace it with the same thing.
For OEM versus aftermarket: Boral manufactures its own pavers, and we source direct Boral replacements whenever the color and texture need to match an existing surface. Aftermarket equivalents from other manufacturers rarely match Boral’s fired-clay color range closely enough to blend, even with the same color name on the box. We’ll tell you honestly when a match isn’t possible and show you the closest options before you spend a dollar.
Styles & brands we work with
Signs Your Boral Driveway & Pavers Is Failing
- Low spots that collect water after rain. This is the most common early sign on Dallas clay. The base layer under the pavers has washed out or compacted unevenly, and the pavers are now telegraphing that movement. Left alone, the low spot grows and invites more base erosion.
- Pavers that rock when you step or drive on them. Rocking means the bedding sand has migrated out from under that paver. In driveways, this usually starts at the edges near expansion joints, where water finds a path in during heavy North Texas downpours.
- Cracks running through individual pavers, not just between them. A cracked paver in a vehicle path almost always means the paver is too thin for the load or has lost base support beneath it. Boral clay pavers are strong, but they’re not immune to a void underneath.
- Edge rows separating from the border restraint. The plastic or aluminum edge restraint that holds the perimeter in place has failed or pulled loose. Once the edge goes, the whole field starts to wander outward, opening gaps that widen every season.
- Sand washing out between joints after every storm. Joint sand should stay put. If it’s running out repeatedly, the base isn’t draining and water is moving under the pavers instead of through the joints. On Dallas’s gumbo clay, this is the #1 killer of paver installations that were never properly graded for drainage.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Boral driveway and paver work in Dallas, here’s the range you should expect from a crew that does it right:
- Spot repair (10 – 60 sq ft): $400 – $1,800, including removing affected pavers, repairing or replacing the base, reinstalling pavers, and refreshing joint sand.
- Partial driveway replacement (up to 400 sq ft): $4,000 – $9,000, depending on access, base condition, and whether existing pavers can be salvaged.
- Full paver driveway installation: $7,000 – $18,000, including excavation, compacted base, Boral pavers, edge restraints, and joint stabilization.
- Paver patio installation: $3,500 – $11,000 for typical Dallas patio footprints of 200 – 600 square feet.
Every job includes a written price before we start, the base material we remove and haul away, and a workmanship warranty that runs 365 days from completion. If something we installed fails within that year, we come back and make it right at no charge. You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool.
DIY or Call Us?
You can safely lift the edge of a rocking paver and check whether the sand beneath it has washed out. You can also pull loose joint sand out and refill the joints with new polymeric sand from any Dallas hardscape supply yard. Those are straightforward maintenance jobs.
What goes wrong when homeowners attempt bigger fixes: they patch pavers without fixing the base, and the same low spot returns in six months. Or they replace a Boral clay paver with a concrete lookalike that reads as a repair patch every time they pull into the driveway. Pavers are heavy; a pallet of Boral clay pavers weighs around 3,000 pounds, and moving and resetting them without the right plate compactor and drainage grading is how driveways end up worse than they started. If the base has failed, call us at (432) 302-8761 and we’ll come look at it. Estimates are free.
FAQs
Boral clay and concrete pavers typically last 25 to 50 years in Dallas when installed over a properly compacted base with adequate drainage, but the base itself often needs attention every 10 to 15 years on our expansive clay soil. The pavers are rarely the weak point; what fails first in North Texas is the drainage under them. Call (432) 302-8761 if you’re seeing low spots or edge separation and want an honest read on whether it’s a paver problem or a base problem.
Yes, individual Boral pavers can be removed and reset or replaced, and that’s what we do for most driveway repairs under 60 square feet. The key is matching the paver (brand, thickness, and color batch) and repairing whatever base failure caused the damage in the first place. We stock common Boral paver sizes and colors, and we’ll tell you upfront if an exact match isn’t possible.
Most spot repairs take one day from removal to compacted, re-sanded finish. A partial driveway replacement typically runs two to three days, and a full Boral paver driveway installation in Dallas takes four to seven days depending on size, access, and weather. We’ll give you a day-by-day schedule in writing before the work starts.
We stock common Boral paver sizes, edge restraints, bedding sand, and joint stabilizer, and we order direct from Boral for colors and larger quantities that aren’t on the truck. You won’t need to source anything yourself. If you’re also considering hardscape-adjacent upgrades while we’re there, we can price KraftMaid, Cambria, and Silestone products for indoor work at the same visit.
For a straight answer and a written estimate, call Mason Remodeling Co Dallas at (432) 302-8761. Isaac Pruett walks every paver job himself before the first stone moves, because a plan on paper and a Dallas driveway in front of you are two different things.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
