Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Dallas Owner’s Guide
A PGT kitchen remodel in Dallas typically runs $14,000 to $45,000 depending on footprint, cabinet grade, and whether you’re reconfiguring plumbing or electrical. We carry PGT-compatible cabinet and millwork hardware, hinges, drawer slides, and finish trim on our trucks, and most hardware-level repairs can be completed in one visit. The way Dallas homeowners usually find us: a drawer that won’t close square anymore, a hinge that sags under a heavy door, or soft-close slides that stopped soft-closing about a year after a big-box remodel. You might have the original PGT cabinetry from a builder install, or you added PGT millwork in a later renovation. Either way, when the parts start failing, you’ll feel it every time you reach for a pot.
Which PGT Models This Applies To
Most PGT kitchen installations in Dallas fall into two camps: factory-built PGT cabinet boxes with spec’d hardware, and PGT millwork used for custom trim, panels, and island surrounds. The parts that fail are almost never the box itself. It’s the moving hardware: European-style cup hinges, undermount drawer slides, soft-close mechanisms, and the mounting plates behind them.
If you can find the original cabinet label, it’s usually a white sticker inside the sink base or on the back of a lower drawer. The label will show a series code and sometimes a date. If the label is long gone, measure the hinge cup diameter. PGT cabinetry has used both 35mm and 26mm cup hinges depending on the line and year. That detail matters because the wrong cup size means a door that hangs proud of the frame by an eighth inch, and no amount of adjustment fixes it. For drawer slides, measure the slide length and the clearance between the drawer box and cabinet wall. We’ll match OEM where it makes sense, but we’ll also be straight with you: for hinges and slides, quality aftermarket equivalents from Blum and Salice often outlast the original PGT-installed hardware, especially in a Dallas kitchen that sees wide humidity swings from summer to winter.
Styles & brands we work with
Signs Your PGT Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay aligned – This is almost always hinge fatigue. The spring in the hinge loses tension, and a door that used to sit flush now gaps at the top or rubs the adjacent door. Adjusting a tired hinge buys a month, maybe two, before you’re chasing it again.
- Drawers that stick or catch mid-pull – Undermount slides collect grease, flour dust, and enough dog hair to knit a small rug. When the nylon rollers wear out, the drawer starts dragging and eventually scores the cabinet frame.
- Soft-close that stopped working – The damper inside the slide or hinge is a sealed hydraulic unit. When it fails, the drawer slams. There’s no repairing it. It gets replaced, and if one side failed, the other side usually follows within a couple months.
- Loose hinges pulling from the face frame or panel – Dallas summers and winters cycle the wood through enough expansion and contraction that the original screw holes can wallow out. The fix is a proper fill-and-redrill with a hard-setting wood epoxy, not a longer screw that splits the stile.
- Finish wear on the cabinet box corners near the sink and range – This is a PGT-specific observation from jobs across Oak Cliff and Lake Highlands: the millwork finish at the base corners takes a beating from spills, steam, and cleaning products. Once the finish is breached, the MDF or plywood veneer below starts to swell. Catching it early is the difference between a touch-up and a box rebuild.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For hardware-specific PGT kitchen repairs in Dallas, you’re looking at $200 to $900 for a single-cabinet hinge and slide refresh, or $1,500 to $4,500 for a full kitchen hardware replacement across all boxes and drawers. A broader cabinet reface or partial remodel starts at the $14,000 end of our typical kitchen range and climbs from there based on materials and scope.
| Scope | Dallas Price Range |
|---|---|
| Full kitchen remodel with PGT-compatible cabinetry | $14,000 – $45,000 |
| Complete hardware replacement (hinges, slides, dampers) | $1,500 – $4,500 |
| Single cabinet hardware repair | $200 – $900 |
| Cabinet refacing with PGT door and drawer fronts | $4,000 – $13,000 |
Every quote we give Dallas homeowners is a written, line-item price delivered before we start. You’ll know the cost of parts, labor, and any disposal. No verbal estimate that grows on the final bill. And the work is covered by our 365-Day Done Right Promise: if anything we installed fails within a year of completion, we return and make it right at no charge.
DIY or Call Us?
Cabinet hinges and drawer slides are not dangerous parts, and we will never tell a homeowner to fear their own kitchen. You can check a few things before calling: tighten every hinge screw with a Phillips driver, clean the slide rails with a dry brush and a damp cloth, and wipe the face frame corners with a dry rag after each cook. That last one prevents most of the finish failures we see in Dallas homes.
What goes wrong when owners push further: mismatched hinge cup sizes that leave doors hanging crooked, slide replacements installed a quarter-inch off so drawers sit cocked and rub, and the classic over-tightened screw that strips the hole and turns a $40 repair into a $300 face-frame patch. If you have a drawer that’s come fully off its rail or a door that’s dropped, call us at (432) 302-8761. We’ll come look, tell you what it costs in writing, and have it done before you’ve worked through your weekend chore list.
FAQs
In our experience across Dallas, PGT hinges and slides in daily-use kitchens last 8 to 15 years before they show meaningful wear, and that range tightens in homes with big seasonal humidity swings. Dallas summers push indoor humidity high enough to accelerate roller and spring wear on moving parts.
Hinges are sealed units. If the spring has failed or the cup is wallowed out, replacement is the only real fix. Loose screw holes in the wood can be repaired by filling and redrilling, which we do routinely. Call (432) 302-8761 and we’ll tell you which route applies to your cabinet.
A complete hinge and slide replacement on a standard Dallas kitchen takes one day. Cabinet refacing or a full remodel runs one to three weeks depending on scope. You’ll get a schedule in writing before the work starts.
We stock common PGT cup hinge sizes, undermount slides, soft-close dampers, and mounting plates on our trucks. Unusual finishes or specialty drawer systems may need a short ordering window. We also carry hardware for KraftMaid, Cambria, and Silestone installations.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
