Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Dallas Owner’s Guide
CGI kitchen remodeling in Dallas typically runs $14,000 to $45,000, depending on whether you’re replacing worn cabinet hardware, resurfacing failing cabinet boxes, or doing a full tear-out and rebuild around your existing CGI layout. We stock the most commonly replaced CGI-compatible components on our trucks and can usually have a written price in your hand within a day of walking the space. Most Dallas homeowners call us after a hinge pulls loose, a drawer slide shears, or a cabinet face delaminates from years of Texas heat and humidity cycles.
Here’s what you need to know before you spend a dollar on parts or labor, including which CGI models we see most often and what actually fails first in Dallas homes.
Which CGI Models This Applies To
CGI built its name on modular kitchen cabinetry and component systems, and the failure patterns are consistent across most of what we see in Dallas: the builder-grade and mid-tier lines share hinge boring patterns and drawer slide mounting points, which is good news if you’re replacing parts, but the finish materials vary enough that a face-frame match takes a trained eye. The quickest way to identify your exact line is the printed label inside the sink base cabinet or on the underside of a drawer box. It’ll give you a series code and sometimes a date of manufacture.
Here’s the gotcha we run into weekly: CGI changed its hinge boring depth on select series after 2019. If you order a replacement hinge set by model name alone, you can end up with door cups that sit 2mm proud and never close flush. We measure the cup depth and the overlay before ordering anything. On OEM versus aftermarket, we’re straightforward about it. For hinges and slides, quality aftermarket hardware from Blum or Salice often outperforms the original and costs less. For finished components like doors and drawer fronts, OEM is the only way to get a true color and grain match.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that sag or won’t close flush. This is almost always worn hinge cups or stripped mounting screws. In Dallas, the bigger culprit is the humidity swing between air-conditioned summers and dry winters, which causes the cabinet box to expand and contract until screws lose their bite.
- Drawers that stick, wobble, or fall off the rail. Epoxy-coated slides wear unevenly under heavy use. Once a drawer tilts forward, the slide separates and the box drops. We replace both slides at once, never one side only.
- Venner lift at the door edges or cabinet face. This is the Texas heat doing exactly what it does. The adhesive behind thermofoil and veneer fails first along the top edge of lower doors, right where the oven or dishwasher exhaust rises.
- Soft-close no longer soft-closes. The damper piston inside the hinge or slide dries out or cracks. Some can be swapped, but when the mechanism is integral to the hinge body, replacement is the only fix that lasts.
- Corner cabinet hardware binding. Lazy Susan mechanisms and blind-corner swing arms collect grit and lose their bearing smoothness. Most Dallas homes we service are on slab foundations, and fine dust from the crawlspace-adjacent areas finds its way into every moving part.
Replacement Cost & What’s Included
For a Dallas kitchen, here’s what we quote, parts and labor included, with a written price before any work starts.
- Full kitchen remodel with CGI-compatible cabinetry replacement: $14,000 – $45,000
- Small kitchen remodel (galley or condo kitchens under 120 sq ft): $9,000 – $20,000
- Cabinet installation only (customer-supplied or Mason-procured boxes): $4,000 – $13,000
- Replacing all hinges and slides on a standard 10×10 kitchen: $900 – $2,400
- Single door or drawer front replacement with OEM match: $180 – $600 depending on finish and series
What drives the spread is the cabinet count, the finish type (painted and glazed cost more to match than natural or stained), and whether we’re rebuilding boxes or hanging new ones. Every quote includes haul-away of the old components, hardware alignment and adjustment, and the 365-Day Done Right Promise: if something isn’t right within a year of completion, we fix it at no cost to you.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is genuinely safe to check yourself. You can tighten a loose hinge screw, examine the label inside the sink base to confirm your series code, and measure a drawer front before you call. That saves time on the phone.
What goes wrong in DIY territory is the face-frame removal and finish matching. Prying a CGI door front without releasing the hinge first splinters the frame lip, and once that wood is split, you’re no longer looking at a hardware swap, you’re looking at a box repair. The other place we see trouble is homeowners ordering door fronts by the old label and getting a sheen mismatch that shows in direct kitchen light. If you want to know exactly what you’re dealing with, call us at (432) 302-8761 and we’ll walk you through what to look for before you decide anything.
FAQs
With Dallas’s humidity cycling, expect 12 to 18 years from builder-grade CGI cabinetry before hinge points loosen and veneer lift becomes visible, while mid-tier lines with plywood boxes and better hardware can go 20 to 25 years. The boxes usually outlast the hardware and door fronts. Call (432) 302-8761 and we’ll tell you honestly whether you’re looking at a repair or a rebuild.
Yes, roughly 70% of what we see in Dallas is repairable, most commonly hinge and slide replacement, door front reattachment, or localized veneer repair. Full replacement makes sense only when the boxes are swollen or delaminating throughout. Call (432) 302-8761 for a straight answer on which one you’ve got.
A hardware and door-front replacement on a standard Dallas kitchen runs two to three days. A full cabinet and countertop remodel runs two to four weeks, depending on custom cabinet lead times and countertop templating. We put the timeline in writing with the price, and we don’t start until you’ve approved both.
We stock the most common CGI-compatible hinges, slides, dampers, and mounting hardware, plus fast-match door and drawer front orders through our Dallas suppliers for next-week delivery on OEM pieces. For KraftMaid, Cambria, and Silestone components, we maintain the same quick-order relationships. Call (432) 302-8761 and we’ll check specific compatibility for your series before anyone makes the drive.
No. Mason Remodeling Co Dallas is an independent remodeling contractor serving Dallas and nearby areas. We install, replace, and service CGI-compatible kitchen components, but we are not a CGI dealer or factory representative. You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool.
Call Mason Remodeling Co Dallas for a Free Estimate
Isaac Pruett walks every kitchen himself before the first nail goes in. He’s been reading cabinet labels and measuring hinge cups across Dallas for years, from Oak Cliff bungalows to the condos near the Dallas Market Center, and he’ll give you a written number before any work starts, plain and simple. Every crew member arrives background-checked and uniformed, with a name and photo sent to you before the visit and a photo ID badge at the door. Call (432) 302-8761 for your free estimate.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
