Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Fence Installation: The Dallas Owner’s Guide
Mr-Glass fence installation in Dallas typically runs $3,500 – $9,000 installed, depending on the footage, the gate hardware, and whether we’re rebuilding the post footings or setting new ones. That’s the number we quote most often for a full panel-and-post system on an average Dallas lot. You’ll usually discover you need this when a panel starts rocking in the wind, a gate sags hard enough to drag the latch, or a post has rotted at the base where North Texas clay holds water against it through every rainy spring. You should know who is coming, what it costs, and what happens if something goes wrong – before we ever pick up a tool.
Which Mr-Glass Models This Applies To
Mr-Glass fence systems use a modular glass-panel design that sits in an aluminum or steel channel, and the common thread across their product line is the channel width. We’ve installed replacements that fit panel thicknesses from 3/8″ to 1/2″, and that quarter-inch difference is the compatibility gotcha most homeowners run into when they order parts sight-unseen. Mismeasure by an eighth of an inch and the panel sits loose in the channel, rattles with every gust, and eventually chips along the edge. We stock both channel widths and the corresponding gasket material on the truck, so we match on-site. Mr-Glass panels also come in two height ranges – 42″ and 60″ – and the 60″ panels need posts set deeper because a tall glass panel catches Dallas wind like a sail. We’re an independent service provider, not affiliated with Mr-Glass, but we’ve worked with enough of their product in the field to know exactly what fits and what doesn’t.
Styles & brands we work with
Signs Your Mr-Glass Fence Installation Is Failing
- Posts leaning or pulling away from the panel. This almost always means the footing has shifted or cracked. In Dallas, the clay soil expands and contracts with every wet-dry cycle, which slowly works a shallow footing loose.
- Glass panel chattering in the channel when the wind picks up. The rubber gasket has dried and compressed. North Texas heat bakes rubber until it hardens, and once the cushion is gone, the panel vibrates against the metal channel.
- Gate dragging the ground or the latch no longer lining up. Gate hinges wear under the extra weight of a glass panel. Most Mr-Glass gates we see in Dallas fail at the top hinge first, because the panel acts as a lever and the hinge takes the full twisting load.
- Hairline cracks radiating from a corner or edge of the glass. This is stress cracking, not an impact chip. It happens when a panel is pinched in a shifting frame or when the channel holds the glass too rigidly while the post moves behind it.
- Standing water pooled at the base of a post after rain. Dallas downpours collect against post footings, and if the concrete wasn’t crowned to shed water, the post base rusts or rots from the bottom up. This is the most common failure we fix on homes built before the current fencing codes went into effect.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Mr-Glass fence installation in Dallas lands between $3,500 and $9,000 installed. The low end of that range covers a shorter run – say 30 to 40 linear feet – with 42″ panels, straight post settings, and no gate work. The high end covers 60″ panels, a full property line, gate replacement with new hardware, and eyebrow-raising soil conditions. Dallas clay is merciless on shallow footings, so a chunk of that estimate is excavation and concrete. Here’s how the pricing breaks down:
- Post setting (concrete, per post): $150 – $300
- Glass panel installation (per linear foot): $65 – $110
- Gate replacement (including hinges and latch): $800 – $1,800
- Gasket and channel replacement (per linear foot): $20 – $40
Every quote is written, line-itemed, and delivered before we start – no verbal estimates that grow surprises on the final bill. The installation itself is covered by our 365-Day Done Right Promise: if anything we built isn’t right within a year of completion, we come back and fix it at no charge.
DIY or Call Us?
Glass panel fences aren’t high-tension like a garage door spring, but they are heavy, awkward, and unforgiving. A 60-inch tempered glass panel weighs enough that a dropped corner on concrete means a shattered panel, not a scratched one. What you can safely do yourself: check the gasket material by pressing on it (if it’s rigid and brown instead of black and pliable, it’s gone), verify which panel thickness you have with a tape measure, and note whether any posts have visible lean. What we’d rather you not do: pull a panel out of its channel without a second pair of hands, or try to reset a post that’s moved more than an inch – that’s a footing problem, not a shim problem. If you’re south of the Trinity or over in Lakewood and you’re staring at a fence line that isn’t straight anymore, call (432) 302-8761 and we’ll take a look. The estimate is free.
FAQs
A properly installed Mr-Glass fence system on correctly poured footings lasts 15 to 20 years in Dallas before the channels, gaskets, or post bases need attention. The glass itself rarely fails on its own – it’s the metal and rubber around it that North Texas heat and clay soil break down first. If your footings were done right and water was crowned away from the posts, you’re in good shape. Call (432) 302-8761 and we’ll inspect what’s failing before you spend any money.
Yes, in most cases we can replace just the failing post footings, gaskets, or gate hardware and leave the glass panels in place. The exception is when the panels themselves are stress-cracked – once glass shows cracks radiating from an edge, replacement is the only safe fix. We’ll quote the repair and the full replacement side by side so you can decide with real numbers. Call (432) 302-8761 to schedule a free estimate.
A typical Mr-Glass fence installation or repair in Dallas takes one to two days, depending on how many footings need concrete and whether the weather cooperates. Concrete needs a day to cure before we hang panels on fresh posts, so plan on a two-day window if we’re doing full post replacement. We’ll give you a written timeline before the job starts so you know exactly when the crew arrives and when the fence is done.
We keep the common gasket profiles, channels, hinges, and latch hardware in stock for most Mr-Glass panel configurations. For unusual panel thicknesses or custom heights, we can typically source the right part within a few business days. The same applies to select KraftMaid, Cambria, and Silestone components on other jobs – if it’s on our truck, you save the wait. Call (432) 302-8761 and we’ll tell you during the first conversation whether we have what your fence needs.
Ready to get your Mr-Glass fence sound again? Call Mason Remodeling Co Dallas at (432) 302-8761. You’ll get a real person on the line, a written line-item estimate before any work starts, and the name and photo of the technician who’ll stand at your door. That’s how we’ve done it since 2004, and we’re not changing it now.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
