Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Dallas Owner’s Guide
If you have a Tremron bath or shower component that has failed, cracked, or simply stopped looking like it should, we can match it and install a correct-fitting replacement. The typical installed cost for Tremron-related bathroom remodeling work in Dallas runs $9,000 to $28,000, depending on whether it is a vanity-and-floor refresh or a full shower system replacement. Most homeowners discover trouble either through visible cracking at the pan or base, persistent slow drainage, or discoloration that no cleaner touches. When it goes that far, the real question is rarely “can it be patched” and more often “what is behind this wall and how far has water traveled.”
Tremron manufactures concrete and hardscape products widely used across Texas construction. In bathroom contexts, Tremron surfaces most often show up as shower pans, curb bases, and occasionally as decorative flooring transitions in older Dallas homes where hardscape material crossed over from patio use. We are an independent Dallas remodeling company, not affiliated with Tremron, but our crews have matched and worked around enough Tremron-installed bases and curbs to know the quirks. One we see regularly: Tremron concrete shower pans in Dallas homes built between 1995 and 2010 tend to develop hairline stress fractures at the drain collar first, long before the visible surface shows anything. By the time a homeowner notices staining at the tile line, moisture has already been working behind it.
Which Tremron Models This Applies To
Tremron bathroom applications in the Dallas area are typically in three forms. First, the poured concrete shower pan, which the company supplied to several mid-range Dallas builders as a pre-formed base. Second, the curb block, a dense concrete unit that forms the threshold of the shower entry. And third, a smaller number of homes where Tremron paver units were installed as bathroom or mudroom flooring, usually as a design carryover from an adjacent patio.
If you are not sure what you have, look for three things. A stamp on the underside or edge of the unit is the most definitive, and Tremron stamps usually include a plant code and a year. Dimensions matter: Tremron curb blocks in Dallas typically run 4 inches tall by 6 inches deep, while the shower pans differ from standard fiberglass pans in that they are dead flat with no integrated slope, which means the slope has to come from the mortar bed above. That flatness is a compatibility gotcha any installer needs to know. Third, Tremron concrete in this region tends to show a gray-to-tan color shift from surface to core, a signature of the aggregate mix they used during the Dallas building boom years.
For OEM versus aftermarket: genuine Tremron replacement units are often only available through pooling yard distribution and can take weeks. Quality aftermarket equivalents fabricated to the same dimensional spec are typically the smarter route for Dallas homeowners because they allow us to cast the slope correctly on-site and avoid the 3 to 6 week wait. We can advise either way once we measure the opening.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Discoloration that keeps returning at the pan or base edges. Efflorescence, the white powdery film, means moisture is wicking through the concrete and evaporating on the surface. It points to either a drain seal failure or missing waterproofing between the Tremron unit and the tile layer.
- Hairline cracks running from the drain collar outward. This is the classic Tremron pan stress pattern in Dallas, caused by thermal expansion cycles and, often, an improperly compacted sub-base under the pan. Water moves along those cracks even when they look harmless.
- Loose or hollow-sounding tile directly over the pan. Indicates the thinset has debonded from the Tremron surface, typically because the concrete was never properly prepped or sealed before tile installation.
- A persistent musty smell in the bathroom with no visible leak. Trap or drain flange gaskets degrade with the constant Dallas humidity swings. The smell means water is pooling under the pan rather than flowing through it.
- The curb block has shifted or separated from the wall framing. You will see a widening gap at the shower entry. A shifting curb usually means the framing behind it has started to swell from water contact, which turns a cosmetic repair into a structural one quickly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Tremron-specific shower pan or curb replacements in Dallas, you are generally inside a much smaller range than the full bathroom envelope. A complete pan replacement with demolition, re-slope, waterproofing, and re-tiling typically lands between $4,500 and $9,000. A full bathroom remodel that includes a Tremron-sourced pan replacement alongside new tile, fixture work, and a glass enclosure runs $9,000 to $28,000. If you are only swapping a failed curb and the first two tile rows above it, expect $1,200 to $3,500.
Every project gets a written line-item price before work begins. That is our standard, not a favor. It lists demolition, the pan or curb unit (OEM or aftermarket, with the reasoning stated), waterproofing, setting materials, labor, and haul-away. The 365-Day Done Right Promise covers all of it: if something we installed is not right within a year of completion, we return and make it right at no cost. We also provide a written guarantee stating exactly what is covered and for how long, with no fine-print games. Call (432) 302-8761 for a free estimate and we will walk you through the line items.
DIY or Call Us?
A homeowner can reasonably do two things: run a moisture test by placing a plastic sheet over the pan overnight and checking for condensation, and verify the drain cover screws are not stripped. That helps you describe the problem accurately on the phone. Beyond that, this is not a DIY repair. Once a Tremron pan is cracked, lifting it means cutting into surrounding tile, exposing the mortar bed, and almost certainly discovering water damage to the subfloor. That subfloor work crosses into structural territory, and cutting corners there is how Dallas homeowners end up doing the job twice. You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool. Call (432) 302-8761 and we will send a crew member with the exact measurements for your Tremron opening.
FAQs
A properly installed Tremron shower pan in Dallas typically lasts 15 to 25 years, but the tile and waterproofing layer above it will usually need attention every 10 to 15 years due to our summer heat and humidity cycles expanding and contracting the concrete. The pan itself often outlives the surface above it. Call (432) 302-8761 for an assessment, estimates are free.
Hairline surface cracks can sometimes be epoxy-injected and sealed if caught before water migration starts, but cracks running from the drain collar or any crack wider than a dime means replacement because the structural path for water is already open. We will give you an honest read after inspection. Call (432) 302-8761 to schedule a look.
A curb block replacement is a one-day job. A full pan replacement with re-tiling runs 3 to 5 working days in Dallas, including the time needed for the mortar bed and waterproofing to cure properly before tile goes down. We do not rush cure times, and the written price reflects the real schedule.
We stock three standard curb block profiles and the setting materials for Tremron-compatible pans on our Dallas trucks. Full pans are ordered to spec since the dimensions vary by builder, not by a single universal size. If your unit matches one of our common profiles, the install can often begin the same day we measure.
No. The written price you approve before demolition is the price you pay, unless you ask us to do extra work after seeing what is behind the wall. In that case, we provide a change order in writing and wait for your approval. No surprise invoices, ever.
If you are looking at a cracked Tremron pan or a curb that has started pulling away, the worst move is to wait. The water keeps moving. Call (432) 302-8761 and we will give you a straight answer about what is behind it, what it costs to fix, and when a Mason Remodeling crew can be there. Free estimate, no obligation.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
