Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Bathroom Remodeling: The Dallas Owner’s Guide
A full bathroom remodel in Dallas that incorporates Cambridge Pavers products typically runs $9,000 to $28,000 installed, depending on the size of the space, the paver material chosen, and how much plumbing or structural work the existing bathroom needs. Most Dallas homeowners reach out to us after years of living with a bathroom that leaks at the curb, has cracked or shifting pavers on the shower floor, or shows water staining along the walls where the paver meets the drywall. The good news is that Cambridge Pavers makes a reliable product line, and when installed correctly over a properly sloped and waterproofed base, it holds up well in North Texas. The bad news is that the base underneath is usually where the failure starts, not the paver itself.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers offers several paver lines that work in bathroom applications, but the two you’re most likely to have are from their Ledgestone and Maytrx collections, both of which are sold through dealers across the Dallas-Fort Worth metro. Ledgestone is a split-face wall product used on bathroom accent walls, shower surrounds, and wainscoting, and it comes in multiple face heights including 2-inch, 3-inch, and 6-inch profiles. Maytrx is a dimensional paver more often used for flooring applications, including shower floors and bathroom entry transitions. The compatibility gotcha we see most often in Dallas: Ledgestone is a wall product, not a floor paver, and it will crack under foot traffic if a previous installer used it on a shower floor or bathroom floor to match the wall. If you’re not sure which line you have, look at the back of a loose piece for a molded product code, or measure the face height. Face heights run 2, 3, or 6 inches on Ledgestone and 2-3/8 inches thick on Maytrx pavers. We’re an independent service provider, not affiliated with Cambridge Pavers, which means we match your existing material by spec and appearance rather than by part number alone.
Styles & brands we work with
Signs Your Cambridge Pavers Bathroom Remodeling Is Failing
- Water staining at the bottom of a Ledgestone accent wall. This usually means the waterproofing membrane behind the stone was never lapped correctly over the shower pan liner. The paver is fine; the install behind it isn’t. In Dallas, we see this a lot in homes built or flipped between 2005 and 2015, when speed mattered more than flashing details.
- Loose or “hollow-sounding” pavers on the shower floor. Tap a few pavers with the handle of a screwdriver. A dull thud means the thinset is still bonded. A hollow ring means the paver has debonded from the mortar bed. Once one paver moves, water gets under the rest and the problem spreads quickly.
- Efflorescence, the white chalky film, that keeps coming back. Efflorescence on pavers means water is migrating through the material and evaporating at the surface, carrying soluble salts with it. In Dallas, where tap water is moderately hard, you’ll see this recur unless the migration source is corrected. Sealing alone won’t stop it long-term.
- Cracked or chipped paver edges at the shower curb. Curbs take the most direct hits from feet, cleaning tools, and shifting weight. A cracked curb paver isn’t just cosmetic. The crack lets water reach the wood framing inside the curb, and over time that framing rots and the curb sags.
- Musty odor that doesn’t clear, even after cleaning. Smell is the first sign of a hidden leak behind or under Cambridge Pavers. By the time the odor is obvious, water has usually been sitting against wood or drywall for weeks. We’ve opened up walls in Lakewood and Preston Hollow and found studs that were soft enough to push a screwdriver through by hand.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what full Cambridge Pavers bathroom remodeling work costs in the Dallas market, including both parts and labor:
| Scope of Work | Installed Price Range |
|---|---|
| Full bathroom remodel with Cambridge Pavers | $9,000 – $28,000 |
| Small bathroom remodel (half bath or compact full bath) | $5,000 – $12,000 |
| Walk-in shower installation with pavers | $4,500 – $12,000 |
| Tub-to-shower conversion with Cambridge Pavers | $3,500 – $10,000 |
| Shower replacement only | $3,000 – $7,500 |
The two biggest cost drivers in Dallas are demolition and waterproofing. If the existing shower pan and wall substrate have been leaking, you’re removing more material and rebuilding more framing, and that adds real labor hours. Cambridge Pavers material itself runs modestly more than standard porcelain tile, but it’s the prep underneath that separates a five-year install from a twenty-year one. On every project we deliver a written price before any work starts, in the fixed range above, no change orders because we discovered something unexpected and decided to call it an extra. Our workmanship carries a written guarantee, and our 365-Day Done Right Promise applies: if something we installed isn’t right within a year of completion, we fix it and we don’t charge you.
DIY or Call Us?
An owner who is reasonably handy can check a few things safely: run the shower, then run a dry hand around the outside of the curb and along the baseboard for dampness. Look for cracked grout lines between pavers. Check whether caulk at the wall-to-paver joint has pulled away. Those observations help you describe the problem when you call. What we don’t recommend is pulling up pavers yourself. Once you lift a paver, you expose whatever is underneath, and if the substrate is already failed, you may release water that was contained or break an adjacent paver you could have saved. Cambridge Pavers aren’t a high-tension or electrical hazard the way a garage door spring or a panel is, but broken pavers have sharp edges, and a collapsing mortar bed under a shower floor can shift beneath your feet and cause a fall. If water is involved, the repair nearly always extends beyond the paver itself into the waterproofing layer beneath it. That’s the job you call a professional for. Call us at (432) 302-8761 and we’ll walk you through what you’re seeing before we ever schedule a visit.
FAQs
Properly installed Cambridge Pavers in a bathroom application last twenty years or more, but only if the waterproofing system beneath them is sound and the bathroom is adequately ventilated. In Dallas, where summer humidity runs high from May through September, bathrooms with no exhaust fan or a weak fan will show efflorescence and mold on pavers years earlier than a well-ventilated bath in the same house. The pavers aren’t failing in that scenario; the room is.
Yes, if the crack is isolated to one or two pavers and the substrate beneath is still solid and dry, we can carefully remove and replace just those pieces. But in our experience in Dallas homes, a cracked paver in a bathroom is usually the visible symptom of movement or moisture underneath, not an isolated material defect. We’ll always tell you honestly which situation you’ve got before quoting anything. Call (432) 302-8761 and we’ll help you figure out what’s actually going on.
Most full bathroom remodels with Cambridge Pavers take two to three weeks from demolition to final grout and caulk. Smaller jobs like a shower floor replacement can be done in three to four days. The real variable is drying time for the mortar bed and waterproofing layers, and in Dallas, where the air doesn’t move much in August, we build in an extra day for cure time rather than rush a wet membrane. We’ll give you a written schedule along with your written price.
We keep a range of Cambridge Pavers Ledgestone and Maytrx pieces in our Dallas warehouse, along with the edge profiles and trim pieces that are most commonly needed on bathroom remodels. For full-room quantities or custom colors that aren’t in our stock, we order from our supplier partners the same way any Cambridge Pavers dealer does. We also stock and install bathroom products from KraftMaid and Cambria, and fabricate with Silestone surfaces, so the entire bathroom can be sourced, priced, and installed through one crew.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
