Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Fence Installation: The Dallas Owner’s Guide
Cambria fence installation in Dallas typically costs $3,500 – $9,000 for a complete run, depending on linear footage, grade, and site prep. We stock Cambria-compatible fencing components and can usually start within a week of your written estimate. Most Dallas homeowners discover a problem the same way: a gate starts dragging, a post leans after a hard rain, or a panel cracks at the corner where sprinkler water has been hitting it for three summers.
Cambria is best known for quartz countertops, but the name carries weight in hardscaping and fencing too. If you bought a home with a Cambria-branded fence system or your builder specified it, you already know it isn’t the big-box panel kit. The posts are thicker, the powder coat is heavier, and the hardware is built to hold up to Dallas clay soil, which moves more than most people expect. The catch is that most fence contractors don’t keep Cambria-compatible parts on the truck. We do, because Isaac Pruett has spent long enough in Dallas to know that matching the part beats improvising with whatever the supply house had on the shelf.
Which Cambria Models This Applies To
Cambria’s residential fencing line doesn’t use the same naming convention as their countertop slabs, so the model confusion usually starts at the parts counter. The current generation is split between the Horizon Series (horizontal pickets, 6- and 8-foot panels, powder-coated aluminum) and the Metro Series (vertical slats, narrower spacing, taller privacy options at 6 and 7 feet). Older Dallas installations often have the Classic Series, which is lighter gauge and was discontinued in 2021 but still appears on homes built between 2015 and 2020.
The fastest way to identify what you have is the post cap. Horizon Series caps are flat with a recessed screw in the center. Metro caps rise slightly and have two side screws. Classic caps are plastic and fade to a chalky gray over time, which is one of the first things Dallas owners notice about that era of fencing. Inside each gate frame, Cambria stamps a four-digit series code on the top hinge plate. If you can read that code before you call us at (432) 302-8761, we can confirm compatibility and bring the right parts on the first trip.
On the OEM-versus-aftermarket question: Cambria’s original posts and rails are worth paying for. The structural members are engineered to handle Dallas’s freeze-thaw cycles, which are mild but real. For hinge and latch hardware, quality aftermarket equivalents from brands we also stock, like Kohler’s commercial hinge line and Silestone-coated latch plates, meet or exceed OEM spec at a lower installed cost. We’ll tell you which is which and why, in writing, before you spend a dollar.
Styles & brands we work with
Signs Your Cambria Fence Installation Is Failing
- Gate drags or won’t latch by late summer. Dallas clay contracts in summer heat, which shifts post footings enough to misalign hinge and latch plates. The gate still looks fine, but the stress is bending the hinge pins a little more every month.
- Post leans after a rainstorm. The soil around the footing has saturated and moved, not the post itself. This is common along fence lines near sprinkler heads or downspouts, and it gets worse every season unless the footing is recompacted or the water is redirected.
- Powder coat bubbling on the lower rail. That’s moisture working behind the coating, usually where sprinkler water wicks up from grass contact. It usually means the aluminum is still fine underneath, but it needs to be addressed before corrosion can start.
- Fence panel rattles in a mild wind. A loose panel often gets ignored because it’s not broken, but the movement is wearing out the locking channels. Every gust loosens the fit another few thousandths of an inch.
- Bottom of the post feels soft when you press it with a screwdriver tip. That is the early stage of alkali reaction common in Dallas’s lime-heavy soil, where an unprotected post base slowly degrades. Treat it now, replace the post later.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed Cambria fence installation in Dallas runs $3,500 – $9,000 for most residential projects. On the low end, that’s a shorter run with good access and no gate rebuilds. On the high end, you’re looking at 150-plus linear feet, multiple gates, and footing work where the clay has shifted. We don’t quote by the panel alone. Grade changes, soil conditions, and the condition of existing footings affect the labor, and we’d rather give you a real number than a happy guess.
Every estimate from Mason Remodeling Co Dallas includes parts, labor, debris removal, concrete for footing work when applicable, and gate re-hanging. Your written price covers everything. If the scope changes, we write a change order and you approve it before we touch anything. Our work is covered by our 365-Day Done Right Promise: if something we installed isn’t right within a year of completion, we come back and make it right at no cost to you. The terms are written on the estimate, plain language, before the first post hole is dug.
Key takeaways:
- Cambria fence replacement in Dallas: $3,500 – $9,000 installed, written pricing before work starts
- We stock Cambria-compatible posts, rails, hinges, and latches on the truck
- 365-day warranty on craftsmanship, spelled out in writing
- Background-checked, uniformed crew with photo ID at the door, per the Threshold Standard
DIY or Call Us?
What you can safely do yourself: read the four-digit code off the gate hinge plate, measure the panel and post spacing, and note whether water pools near any post after rain. That information will make your estimate more accurate on the first call. What we don’t recommend is pulling a post yourself. The concrete footing on a Cambria post goes deeper than most people think, and Dallas clay fights back. If you’ve ever spent a Saturday afternoon with a post-hole digger and a blister, you know what we mean. And if it means you don’t get to it this weekend, your fence will still be leaning on Monday.
For anything involving a gate under tension, a shifted post footing, or a panel that’s pulling out of its channel, call us. You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool. We’ll put that in writing for you at (432) 302-8761.
FAQs
A properly installed Cambria fence lasts 20 to 30 years in Dallas, with the caveat that gate hardware typically wears out in 10 to 15 years and needs replacing even when the panels and posts are still structurally excellent. Soil movement and sprinkler contact shorten post life faster than anything else in this area. Call (432) 302-8761 and we can tell you whether your gates are worth saving before we talk about replacing panels.
Yes, in many cases a leaning Camia post can be straightened and recompacted without full replacement, as long as the post base itself hasn’t degraded from soil alkali reaction. If the lower section feels soft or shows bubbling under the powder coat, replacing the post is the honest fix. The determination is part of the free estimate.
Most installations take two to three working days for a standard Dallas residential lot, including debris removal and gate re-hanging. Larger runs with multiple gates can run longer, and we’ll put the timeline in your written estimate before you commit. Live person answers the phone around the clock if you need to check on scheduling.
We stock Cambria-compatible posts, rails, hinges, and latches on the truck for the Horizon and Metro Series, as well as common Classic Series replacement hardware. If you need something unusual, we can usually have it in hand within a few business days. We’re an independent service provider and not affiliated with Cambria, but our relationship with supplier partners like KraftMaid and Silestone means we can source specification-grade materials quickly.
If your Cambria fence is leaning, dragging, or rattling, call (432) 302-8761 for a free estimate. We’ll bring the right parts, the right price in writing, and a crew you’ll recognize at the door.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
