A Mason company - serving Dallas, TX
An open living room and dining area after a whole-home remodel

CWS Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Dallas
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
A home office with a built-in desk and shelves
A low-threshold walk-in shower with a bench and grab bar
A walk-in pantry with wood shelving
A powder room with botanical wallpaper and a stone sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

CWS Roofing: The Dallas Owner’s Guide

If you have a CWS roof system that’s leaking, lifting, or showing storm damage, we stock CWS-compatible roofing materials and install them throughout Dallas. A typical CWS roof repair in Dallas runs $400 – $1,800, and a full replacement falls between $8,000 and $20,000 depending on the roof’s size and pitch. Most owners discover a problem the same way: a water stain on the ceiling after a hard Texas storm, granules collecting in the gutters, or a shingle in the yard after a wind gust off the Trinity River corridor.

Call (432) 302-8761

We’re an independent service provider, not affiliated with CWS, which means we’re free to source the right material for your existing system without a brand’s markup baked into the part. And if you’ve ever called a roofing company and gotten a voicemail during a storm, you’ll appreciate that a live person answers our phone at (432) 302-8761, day or night.

Which CWS Models This Applies To

A remodeled living room with built-in shelves around the fireplace

CWS roofing systems cross several product lines, and the compatibility gotcha is that CWS has used different fastener patterns and exposure widths over the years. The standing seam panels from their commercial line do not swap cleanly with the residential shingle profiles, even when the color looks identical from the ground. Before you buy anything, check the underside of a loose shingle or the edge of a panel for the stamped lot code and width measurement, usually in inches.

On the residential side, CWS shingle systems typically follow standard 5-inch exposure profiles, which means quality aftermarket equivalents from GAF or CertainTeed will match in most cases. However, if you have a CWS metal roof with a snap-lock seam, that’s a proprietary dimension, and you’ll want OEM or a precision-bent match rather than a generic panel from a supply yard. We also stock parts for KraftMaid, Cambria, and Silestone systems, so if your roofing work overlaps with interior finishes, we can handle both ends of the job.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your CWS Roofing Is Failing

  • Granules in the gutter or at downspout outlets. This means the asphalt layer of a CWS shingle is breaking down, typically from UV exposure or hail impact, and the shingle’s waterproof core is now exposed. Once granule loss starts, the clock is running on the underlying mat.
  • Water stains on ceilings after rain that didn’t penetrate before. On CWS systems, we often see this when the underlayment at a valley or penetration has aged out, even if the visible shingles look fine. The water travels until it finds a seam, then drops.
  • Shingles that lift at the corners even on calm days. This points to failed sealant strips, which Texas heat cycles break down faster than in milder climates. A lifted shingle becomes a tear point in the next thunderstorm.
  • Hail pockmarks or bruising visible on the shingle face. Dallas gets real hail, and a bruise doesn’t mean the shingle failed today, but it has lost granular protection at that spot. Give it a season or two and that’s where a leak starts.
  • Flashing that’s pulling away from chimneys, skylights, or vent pipes. CWS roof systems rely on the flashing being fully sealed to the shingle course below it. When caulk or sealant cracks in Dallas heat, water follows the gap downward.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Service Installed Price Range (Dallas)
CWS-compatible roof repair (patch, flashing, small sections) $400 – $1,800
Full CWS or equivalent roof replacement $8,000 – $20,000
Metal roof installation (if upgrading from CWS shingles) $15,000 – $40,000

What drives the range on a replacement is roof pitch, number of skylights or penetrations, decking condition underneath, and whether we’re hauling off one layer or two. Every quote we give includes the tear-off, underlayment, matching materials, fasteners, flashing work, and cleanup, in writing, before we start. When a Dallas homeowner asks me what something will cost, I’d rather hand them a number that holds than a number that grows. The work is covered for 365 days from the completion date: if it fails, we return and fix it at no charge.

DIY or Call Us?

You can safely inspect the gutters, check for missing granules, and look at the roof from the ground with binoculars after a storm. What I wouldn’t do is get on a ladder with a caulk gun after a storm, because wet composite shingles are slicker than they look and a fall from even a single-story eave in Dallas will ruin more than your weekend.

Roofing is also one of those trades where the part you see is half the job. If the flashing underneath is compromised or the decking is soft, sealing the surface just moves the leak to your ceiling. If you want a straight answer on whether your CWS roof is repairable or replacement territory, call (432) 302-8761 and we’ll walk it with you.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Getting started with Mason in Dallas

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Dallas team

A local crew that works across Dallas and the towns around it, to the same written standard as every Mason location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Dallas? Licensed & insured · Free in-home estimates response · free estimates
Call (432) 302-8761
Local Service Coverage

Request a Free Estimate in Dallas

Tell us what you need - Mason Remodeling Co Dallas responds fast. No obligation.

By reaching out through this form, you accept our Privacy Policy and agree that you may be contacted by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch