Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling: The Dallas Owner’s Guide
A full Kohler kitchen remodel in Dallas typically runs $14,000 to $45,000, with the final number driven by cabinetry scope, countertop material, and how much plumbing or electrical has to move. We install Kohler fixtures and faucets as part of that work, and we carry the most common Kohler replacement parts on our trucks for same-day swaps when something’s already failing. Most Dallas homeowners call us after a Kohler faucet starts dripping from the base, a pull-down spray head loses pressure, or a soap dispenser seizes up completely, and they want to know whether to repair the single part or finally address the whole kitchen.
The honest answer depends on the age of the kitchen. A 2018 Kohler faucet that drips only when the handle sits at a certain angle usually needs a $30 cartridge, not a $25,000 remodel. A 2005 Kohler setup with a cracked sink basin, a faucet that leaks from three places, and cabinetry that’s swelling around the plumbing is a different conversation altogether. We’ll tell you which one you have before we ever write a number.
Which Kohler Models This Applies To
We work across the Kohler kitchen lines you’re most likely to have in a Dallas home, including the Simplice, Bellera, Crue, Malleco, Sous, and Artifacts series, along with older Coralais and Forte models that show up constantly in 1990s and early-2000s Dallas builds. The compatibility gotcha most homeowners miss is that Kohler changed valve-body sizing between generations. A cartridge from a 2016 Simplice will not seat correctly in a 2011 Simplice, even though the faucets look nearly identical from the top. The quickest way to identify yours is the K-number stamped on the tag wrapped around the supply line under the sink, or printed on the original installation manual. It starts with a K and runs seven digits, like K-596.
On the OEM-versus-aftermarket question: for Kohler cartridges and spray heads, we recommend OEM. The ceramic disc tolerances are tight enough that the $12 savings on an off-brand cartridge usually shows up as a persistent drip within six months. For things like supply lines, mounting hardware, and soap dispensers, a quality aftermarket equivalent is generally fine and we’ll tell you when that’s the case. Kohler’s own finishes also matter more than people expect, so we match the finish code (CP for polished chrome, BN for brushed nickel, etc.) before ordering, not just the model name.
Styles & brands we work with
Signs Your Kohler Kitchen Remodeling Is Failing
- Water seeping from the base of the faucet when it runs. This is almost always a failed O-ring or cartridge seal, and it’s the single most common Kohler issue we see in Dallas. Left alone, that slow seep runs down into the cabinet floor and starts the kind of damage that turns a $150 repair into a $4,000 cabinet replacement.
- Spray head drips or dribbles after you release the trigger. The diverter inside the spray head wears out. Kohler sells the spray head as a unit, and we keep the common Simplice and Bellera heads on the truck because this fails so often.
- Handle feels gritty or stiff when you turn it. Hard water deposits in Dallas, especially in areas like Lake Highlands and Richardson with heavier mineral content, build up on the cartridge and score the ceramic discs. You’ll feel it before you see any leak.
- Finish is pitting or flaking on the faucet body. This is a cosmetic failure, but once the finish goes, the brass underneath starts oxidizing. Kohler’s lifetime finish warranty covers a lot of this, and we can document it and help you file the claim.
- Sink basin has hairline cracks at the corners or around the drain. Kohler’s enameled cast iron sinks are tough, but a crack means the enamel has failed. Water gets into the metal, rust starts, and the crack spreads. That’s a replacement, not a patch job.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re replacing a single Kohler part, here’s what you’re looking at in Dallas:
- Faucet cartridge replacement: $40 – $180 for the part, plus $150 – $300 in labor. Most jobs run $200 – $400 total.
- Pull-down spray head replacement: $35 – $120 for the part, usually under an hour of labor, so $150 – $300 installed.
- Complete Kohler faucet replacement: $250 – $900 for the fixture depending on series and finish, plus $200 – $400 installation.
- Kohler sink replacement: $300 – $1,200 for the sink, plus $400 – $800 labor including disconnect, drop-in or undermount install, and reconnection.
- Full kitchen remodel with Kohler fixtures: $14,000 – $45,000 in Dallas, which covers cabinet scope, countertop material choices, plumbing reroutes, and finish level.
You get a written price before we start, every time. That’s the Mason Remodeling policy, and Isaac Pruett has held to it since bringing the company’s approach to Dallas. The written price includes the part, the labor, and any fittings or supplies we need, and that number doesn’t change unless we find something buried in the wall or under the cabinet that no one could see beforehand. In that case, we stop, show you exactly what we found, and get your sign-off on the new number before proceeding. Every job carries our 365-Day Done Right Promise: if the work isn’t right within a year of completion, we make it right at no cost to you.
DIY or Call Us?
A homeowner with basic comfort around a wrench can swap a Kohler spray head or replace a supply line without much trouble. Turn off the water at the angle stops under the sink first, and if those valves are seized or start leaking when you touch them, stop and call us. Water damage in a Dallas kitchen gets expensive faster than people expect, especially with the temperature swings that stress supply lines and shutoff valves over time.
Cartridge replacement is where DIY usually goes sideways, because Kohler cartridges seat with a specific orientation and require a special tool on some series. If you force it, you’ll score the valve body and then you’re replacing the whole faucet anyway. Faucet and sink replacement are also jobs we’d recommend leaving to a professional, not because they’re impossible, but because access under a crowded Dallas kitchen sink turns a 20-minute job into a two-hour wrestling match. If you’d rather spend that time on something else, call us at (432) 302-8761.
FAQs
A well-maintained Kohler kitchen faucet typically lasts 12 to 18 years in Dallas, but hard water in many neighborhoods shortens that lifespan if the cartridge isn’t cleaned or replaced along the way. Kohler’s ceramic disc cartridges are genuinely good, but mineral buildup from our water is the number one thing we see wearing them out before the faucet body itself fails.
Yes, and in about 70% of the calls we run in Dallas, a $40 to $180 cartridge replacement solves the problem completely. The decision comes down to the age of the faucet and the condition of the finish. If the brass body is sound and the finish is intact, we repair. If the finish is pitting or the valve body is scored, replacement is the honest move.
Most faucet replacements take 60 to 90 minutes. A complete sink replacement with an undermount install usually runs three to four hours, including cutting the caulk line, setting the new sink, reconnecting plumbing, and testing for leaks. If your kitchen remodel involves moving plumbing or reconfiguring cabinetry, that’s a multi-week project and we’ll walk you through the schedule before work starts.
We keep common Kohler cartridges, spray heads, and supply lines for the Simplice, Bellera, and Crue lines on our trucks, because those are the series we see most often in Dallas kitchens. Less common models or specific finish matches usually take two to five business days to arrive. We’ll tell you before we leave the first visit exactly what’s on the truck and what needs to be ordered.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
