Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Moen Driveway & Pavers: The Dallas Owner’s Guide
If you’re searching for Moen driveway and pavers parts in Dallas, the honest answer is that Moen doesn’t make driveway pavers. Moen builds faucets, showerheads, and kitchen fixtures. What you’re likely looking for is a paver driveway installation or repair near Dallas, and you’ve landed in the right place to get that sorted with straight pricing and no runaround. A paver driveway in Dallas typically costs $7,000 to $18,000 installed, depending on square footage, paver type, and site prep.
We’re Mason Remodeling Co Dallas, an independent Dallas contractor, not affiliated with Moen. If you found this page because a Moen product led you here, stick around. We stock parts and work with specification-grade brands across KraftMaid, Cambria, and Silestone, and we handle hardscaping brands like Belgard, Unilock, and Techo-Bloc. But this page is about driveways and pavers, and we’ll give you the useful version.
What Actually Fails on a Dallas Paver Driveway
Understanding why a paver driveway fails in Dallas comes down to one word: clay. The expansive clay soils across Dallas, from Oak Cliff up through Richardson, swell when wet and shrink when dry. That movement is what causes pavers to shift, sink, or separate. We see it on nearly every older driveway we evaluate.
Here’s what typically goes wrong, in order of frequency:
- Edge restraints failing. The plastic or aluminum edging that holds the outer pavers in place breaks down over time. Once it lets go, pavers start drifting outward, and the whole field loosens.
- Base material settling. If the original install skimped on the crushed limestone base (common in fast-track Dallas subdivisions), pavers sink unevenly. A proper base is 4 to 6 inches compacted; less than that and you’ll see dips within three to five years.
- Polymeric sand washing out. The sand between joints hardens to lock pavers together, but Dallas downpours and sprinkler overspray erode it. When the joints empty, pavers shift and weeds move in.
- Surface staining and efflorescence. Hard water from Dallas tap lines leaves white mineral deposits on pavers. It’s cosmetic, but it looks worse than it is and often gets mistaken for paver failure.
- Tree root intrusion. Live oaks and pecans across Dallas neighborhoods push roots under paver fields, lifting sections. This usually requires lifting pavers, cutting roots, and re-compacting the base.
Styles & brands we work with
Which Brands and Paver Types We Install in Dallas
You’ll see three paver brands dominate the Dallas market: Belgard, Unilock, and Techo-Bloc. All three make quality concrete pavers, but they differ in ways that matter for Dallas weather.
Belgard pavers come in a wide range of styles and price points, and the manufacturer warranties many lines for life against cracking. Unilock is known for its EnduraColor technology, which bonds color through the paver rather than just on the surface, so Dallas sun fades it less. Techo-Bloc tends to run a bit more expensive because of thicker profile pavers that handle heavier loads, which matters if you park an oversized SUV or truck.
The three paver types you’ll choose from:
- Concrete pavers: Most common, best price-to-durability ratio, available in dozens of colors and patterns. $7,000 to $14,000 for a typical two-car driveway.
- Clay brick pavers: The classic look you see in older Dallas neighborhoods like Lakewood and the M Streets. They hold color forever but cost more. $10,000 to $16,000 for a standard driveway.
- Natural stone pavers: Flagstone, travertine, or granite. Highest cost, highest curb appeal. $14,000 to $18,000 and up depending on stone selection.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what a paver driveway project in Dallas actually costs, broken down so you can self-qualify before you call:
| Project Scope | Dallas Price Range |
|---|---|
| Paver driveway installation (new, 400-600 sq ft) | $7,000 – $18,000 |
| Driveway replacement (tear out and reinstall) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing (paver or concrete) | $250 – $700 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
Every quote we write includes labor, materials, base prep, haul-away of old material, and a written line-item breakdown. You’ll know exactly what you’re paying for. Isaac Pruett walks every driveway job himself before the first paver gets set, because a plan on paper and a slope in front of you are two different things. Our workmanship is covered by our 365-Day Done Right Promise: if something isn’t right within a year of completion, we fix it at no cost to you.
DIY or Call Us?
You can safely handle some things yourself. Re-sanding joints with polymeric sand is straightforward if the pavers themselves aren’t shifting. Sealing is also a reasonable DIY project with the right product and a dry Dallas weekend. And pulling small weeds between pavers is just maintenance.
What you shouldn’t DIY is anything involving the base or the structure. Lifting settled pavers, re-compacting a base, or re-setting edge restraints requires plate compactors and an understanding of drainage. Get it wrong and you’ll be re-doing it in two years. Our crews fix more botched DIY paver jobs than we’d like to admit. If you’re not sure, call us at (432) 302-8761 and we’ll tell you straight whether it’s a $50 fix or a real job.
FAQs
A properly installed paver driveway in Dallas lasts 25 to 30 years, though the base may need minor attention around year 15. The pavers themselves rarely crack; the failure point is almost always the base or edge restraint.
You can absolutely repair sections. If the pavers are in good shape, we lift them, fix the base beneath, and re-set them. Sectional repair typically runs $800 to $2,500 depending on how many square feet are involved. Call (432) 302-8761 and we’ll give you an honest read.
Most Dallas paver driveway installations take three to five working days from tear-out to final compaction. Weather can stretch that, especially in spring storm season. We’ll give you a written timeline before work starts.
We stock a rotating selection of Belgard and Unilock pavers at our Dallas yard, including the most common colors. If you need a specific Techo-Bloc style or a custom color, we order it, which typically adds three to five business days.
You should know who is coming, what it costs, and what happens if something goes wrong, before we ever pick up a tool. Call (432) 302-8761 for a free estimate on your Dallas paver driveway. A live person answers, every time.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
