Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Driveway & Pavers: The Dallas Owner’s Guide
We stock and install Tremron-compatible pavers for driveways, patios, and walkways across Dallas, with typical paver driveway installation running $7,000 to $18,000 depending on square footage and site prep. Most homeowners call us after discovering a sunken section, a cracked paver that has shifted out of alignment, or edge restraints that have let go after a few hard Texas summers. Replacement is usually faster than people expect because we keep common Tremron sizes on hand and can match existing layouts without tearing out the whole surface.
Which Tremron Models This Applies To
Tremron manufactures pavers in a few families you will see around Dallas driveways: the Holland/Heritage series (rectangular, interlocking), the Olde Towne series (tumbled edges, wider joints), and larger-format slabs like the Mega line. The compatibility gotcha most owners run into is sizing. Tremron pavers are sold in metric-based dimensions that do not always match big-box paver stock, so buying a “similar” gray paver from a retailer leaves you with height differences and joint lines that never seat correctly. You need the actual Tremron product number, usually stamped on the underside of an existing paver or listed on your original installation invoice. If that is gone, we measure the paver and match it by dimensions, thickness, and chamfer profile. We are an independent Dallas contractor, not a Tremron affiliate, which means we carry both OEM Tremron pieces and proven aftermarket equivalents where they make sense. For driveway pavers specifically, OEM is almost always the right call because color batch and dimensional tolerance matter more than they do on a garden path.
Styles & brands we work with
Signs Your Tremron Driveway & Pavers Is Failing
- Sunken or dipping sections near the garage apron or along tire paths. This usually means the base layer has eroded or was never compacted deep enough for Dallas clay soil, which expands and contracts with moisture. The pavers themselves are usually fine; the foundation under them is the problem.
- Cracked pavers that crumble at the edges. Tremron pavers are dense, but a heavy vehicle turning in place on a hot day can fracture them, especially if the sand joints have emptied out and the pavers are grinding against each other.
- Spreading or gaps along the outer edge. When plastic or metal edge restraints fail, the whole field starts to drift outward. You will see gaps widening between pavers and the border pulling away from the lawn or planting bed.
- Weeds or ant mounds pushing up between joints. Losing joint sand to erosion is common after Dallas downpours. Once sand is gone, weeds get a foothold, and the pavers lose the lateral lock that makes them act as one surface.
- Efflorescence, a chalky white haze, plus surface spalling on older pavers. The haze is cosmetic, but spalling, where the top layer flakes off, means moisture has penetrated and Dallas freeze-thaw cycles have done their work. That paver needs replacement, not resealing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a full paver driveway installation in Dallas, expect $7,000 to $18,000. A partial repair, where we lift a failed section, re-compact the base, and relay the existing pavers, typically runs $1,500 to $5,000 depending on how much base reconstruction is needed. Paver patio installation runs $3,500 to $11,000.
What drives the range: driveway size, how much of the base needs rebuilding, paver thickness (60mm vs 80mm), and whether we are matching an existing Tremron color that may need to be special-ordered. Every quote includes removal of failed pavers, base prep and compaction, new or reconditioned edge restraints, joint sand, and cleanup. We give you a written price before work starts, and the work is covered by our 365-Day Done Right Promise. If something is not right within a year, we come back and make it right at no cost.
DIY or Call Us?
A homeowner can safely do two things: check whether edge restraints are still buried and intact, and look for missing joint sand after a storm. That tells you how urgent the problem is. Rebuilding a paver section is where DIY goes sideways. Most driveways in Dallas sit on 4 to 8 inches of compacted base, and if that base is the problem, replacing pavers on top of it is a temporary fix at best. The old base has to come out, the subgrade needs to be leveled, and the base re-compacted in lifts. Skip the compaction or use the wrong base material and you will be repairing the same spot after the next wet spring. The work itself is not dangerous, but the equipment is heavy and the labor is unforgiving. If the prepared section spreads or sinks again, the cost to redo it exceeds what the repair would have cost the first time. Call (432) 302-8761 for an honest assessment before you rent a plate compactor.
FAQs
A properly installed Tremron paver driveway in Dallas lasts 25 to 40 years, with the pavers themselves often outlasting the base. What fails first around here is usually the base layer under tire paths or edge restraints on slopes, because clay soil movement and heavy rain cycles stress both. Re-sanding joints every few years extends surface life significantly.
A single cracked paver gets replaced, not repaired. We cut around it, lift the damaged piece, seat a matched Tremron paver, and re-sand the joints. The bigger question is why it cracked: if the base under it is sound, it is a simple swap. If the base has settled, replacing the paver without fixing the base means it will crack again. We will tell you which situation you have before quoting the job, so call (432) 302-8761.
A small paver repair or edge-restraint fix on a Dallas driveway takes one day. A larger section rebuild with base re-compaction typically runs two to three days, depending on how much subgrade correction is needed and whether the Tremron color has to be ordered in. We will give you a start date and a realistic finish window in the written quote.
We stock common Tremron Holland/Heritage and Olde Towne sizes in gray, tan, and charcoal tones for Dallas-area repairs, and we can pull exact matches from local supply yards within a day or two for less common colors like River Red or Sierra. If your line was discontinued, we will source the closest available match and tell you plainly before any paver gets set. Call (432) 302-8761 for a free estimate and we will confirm exactly what we can match.
If you need a Tremron driveway or paver repair in Dallas, call (432) 302-8761 for a free estimate. We will walk the surface with you, show you what is failing and why, and put the price in writing before any work starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co Dallas at Mason Remodeling Co Dallas, serving Dallas and nearby areas.
