Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Dallas?
Paver driveway installation in Dallas typically costs between $7,000 and $18,000 for a standard two-car driveway in 2026. Most Dallas homeowners pay around $12,500 for Belgard or Techo-Bloc pavers over a properly compacted base. Your final price depends on square footage, paver grade, and how much site prep your existing driveway needs.
That range assumes a driveway of roughly 400 to 600 square feet. Small single-car driveways in neighborhoods like Casa View or Lochwood can dip below $7,000, while sprawling circular drives in Preston Hollow or Bluffview with retaining walls and drainage work can push toward $18,000 or more.
Key Takeaways:
- Typical Dallas paver driveway: $7,000 to $18,000
- Most common project size (400-600 sq ft): $10,000 to $14,000
- Average cost per square foot installed: $14 to $28
- Material makes up 35-45% of the total; labor and base prep make up the rest
- Dallas clay soil adds base-prep costs most coastal cities never see
Paver Driveway Installation Cost Breakdown (2026)
Here’s what we actually charge, line by line, when we bid a paver driveway in Dallas. These are real ranges from our written quotes, not national averages pulled from a database.
| Cost Component | Typical Range (Dallas) | Notes |
|---|---|---|
| Excavation & grading | $1,200 – $2,800 | Includes removing old concrete or asphalt, haul-away, rough grade |
| Base material (crushed stone, 4″-6″ compacted depth) | $900 – $2,200 | Dallas clay and expansive soil means we compact in lifts, not one pass |
| Sand bedding layer | $350 – $800 | 1″ screed layer over compacted base |
| Pavers (material only) | $3,500 – $9,500 | Concrete pavers run $7-$14/sq ft; clay brick runs $10-$20/sq ft |
| Edge restraints & polymer sand | $400 – $1,000 | Plastic or aluminum edging; polymeric sand in joints |
| Labor & installation | $2,500 – $6,000 | Cutting, pattern layout, compaction, finishing |
| Sealing (optional) | $600 – $1,800 | We recommend sealing every 3-5 years in Dallas sun |
Concrete pavers from Belgard, Unilock, or Techo-Bloc dominate the Dallas market because they handle our freeze-thaw cycles and brutal August heat without cracking. Clay brick pavers are the premium option, and they show why: a 500-square-foot clay paver driveway in East Dallas will run $2,000 to $4,000 more than the same footprint in standard concrete pavers.
One thing that surprises Dallas homeowners: the base layer matters more than the paver itself. Dallas sits on expansive clay soil that swells when wet and shrinks when dry. Skip the base work and your driveway shifts within two years. That’s the single biggest difference between a $7,000 driveway that lasts 25 years and a $5,000 driveway that sinks by 2028.
What Affects Paver Driveway Installation Pricing in Dallas
- Square footage. Most two-car driveways run 400-600 square feet. A standard 20-by-20 pad is 400; a wider 24-by-24 with a turnaround is 576. Every additional 100 square feet adds roughly $1,400 to $2,800 to the quote.
- Existing driveway removal. If you have poured concrete or asphalt down now, demolition and haul-off add $1,200 to $2,800 depending on thickness and whether rebar is present. 1960s-era concrete in Preston Hollow and Lakewood also raises the final bill because it’s heavy and thick.
- Paver grade and brand. Entry-level concrete pavers from a big-box supplier start around $5-$7 per square foot for materials. Mid-grade Belgand and Techo-Bloc run $8-$12. Premium clay pavers or large-format slabs run $12-$20 plus more labor for cutting.
- Clay soil and base depth. Dallas County sits on the Austin Chalk and Eagle Ford formations, with highly expansive clay in many areas. In mesquite-heavy southern Dallas neighborhoods, we often add 2 extra inches of crushed-stone base to fight shifting. That’s $300 to $700 more than the same driveway in, say, Fort Worth’s sandier pockets.
- Slope and drainage. Driveways that pitch toward the house need a channel drain or regrade. Adding a 20-foot linear drain in a sloped driveway off White Rock Lake can add $800 to $1,600.
- Pattern complexity. Herringbone and basketweave patterns require more cutting at edges than a running bond. Expect $1.50 to $3 more per square foot in labor for anything beyond a simple field pattern.
How to Save on Paver Driveway Installation
Saving money on a paver driveway is about timing and choices, not cutting corners on base work. Here’s what actually moves the number:
- Stick to standard concrete pavers. Belgard’s 3-piece Mega-Arbel system or Techo-Bloc’s Aberdeen line gives you the look at $7-$10 per square foot in material. You still get the durability; you skip the clay-brick markup.
- Keep the footprint simple. Every curve, flare, and apron adds cutting time. A rectangular driveway is the cheapest shape to install.
- Combine projects. If you’re already doing a paver patio or walkway, the crew is on site and the base crew is mobilized. We regularly see $800 to $1,500 in shared-setup savings when homeowners bundle Paver Driveway Installation in Dallas with a patio or walkway.
- Schedule for winter. Dallas paver crews are busiest March through June. December and January quotes often come in 5-10% lower because crews are hungry and the schedule is open.
- Get a written price before work starts. Every Mason Remodeling project includes a written quote with line items. If a contractor gives you a verbal estimate and a handshake, walk away. Verbal estimates grow.
Call us at (432) 302-8761 for a free estimate in writing. It takes about 45 minutes to measure, and you’ll have real numbers, not a range pulled from the internet.
Paver Driveway Installation Cost in Dallas FAQs
Is a paver driveway worth the cost compared to concrete in Dallas?
Paver driveways cost $7,000 to $18,000 versus $4,500 to $12,000 for poured concrete in Dallas. The difference is longevity and repair cost: a single cracked paver can be popped out and replaced for $50 to $150, while a cracked slab needs section replacement at $800 to $2,000. Dallas clay soil shifts, and pavers flex with the soil instead of cracking against it. Most Dallas homeowners we talk to choose pavers when they plan to stay in the home 10 or more years. Call (432) 302-8761 for a written quote on either option.
How long does paver driveway installation take in Dallas?
Most Dallas paver driveway installations take 3 to 5 working days from first cut to final compaction. Day one is excavation and base prep; days two and three are laying and cutting pavers; day four is polymeric sand and final compaction. Rain in spring can stretch that to 6 or 7 days, because we don’t lay pavers on saturated base. We’ll give you a start date and a completion date in writing before we begin.
How much does it cost to seal a paver driveway in Dallas?
Sealing a paver driveway in Dallas costs $600 to $1,800 depending on square footage, and we recommend resealing every 3 to 5 years. Dallas sun fades unsealed concrete pavers within two summers; a quality solvent-based sealer keeps the color saturated and helps shed the red-clay dust that blows in from spring storms. Sealing is optional at install but recommended within the first 60 days after the polymeric sand cures.
Do I need a permit for a paver driveway in Dallas?
In most Dallas residential zones, replacing an existing driveway surface with pavers does not require a city permit. New driveway construction, widening an existing driveway, or changing the apron where it meets the street typically requires a permit through Dallas Development Services. If you’re in a historic district like Swiss Avenue or Munger Place, there may be additional design review. We handle permit verification on every project and will tell you upfront if yours needs one.
Can you install a paver driveway over existing concrete in Dallas?
Technically yes, but we rarely recommend it. Dallas clay soil shifts, and if the concrete below your pavers cracks, the paver above follows the crack line. Overlay installation costs $3,000 to $5,500 less than full excavation, but the failure risk rises sharply on soil that expands and contracts. We’ll give you the honest answer after we look at your existing slab: if it’s structurally sound with no major cracks, overlay is viable; if it’s cracking, full removal and proper base is the only way we’ll warranty the finished driveway.
Who Is Building Your Driveway
Before any crew arrives, you’ll know exactly who is coming. Mason Remodeling Co Dallas, led by Isaac Pruett, has been operating since 2004 as part of the Threshold Group family of home-service companies. Every technician that steps onto your property has been background-checked and identity-verified under the Threshold Standard, which means you get the technician’s name and photo before the visit, and a photo ID badge at the door when they arrive.
That matters to us because we know it matters to you. Opening your door to a stranger is a genuine safety decision, and our process removes the guesswork. The crew arrives in clean, marked uniforms. The crew lead introduces himself by name. The work area is tarped and cleaned daily. You know who is in your home, and you know what the work will cost, because the written price is delivered before any tool is unpacked.
Mason Remodeling also backs every paver driveway project with the 365-Day Done Right Promise: if the work is not right within a year of completion, we make it right at no cost to you. The terms are written plainly on every contract, including what is covered, what is excluded, and for how long. If a repair or installation fails, we return for free. No charge, no dispute process, no conditions. That’s the standard Isaac Pruett holds his crews to, and it’s the standard we’ve held for more than 20 years.
We work with hardscaping materials from Belgard, Unilock, and Techo-Bloc because they’re specification-grade products that hold up to Dallas weather and Dallas clay. When you call us, a live person answers, 24 hours a day, 7 days a week. No call trees, no voicemail loops, no waiting until Monday morning.
From kitchens and bathrooms to home remodels, Mason Remodeling Co Dallas puts the price in writing and the crew in verified uniforms before work begins. That’s how we’ve done it since 2004, and that’s how we’ll do it on your driveway.
Get Your Free Paver Driveway Estimate in Dallas
We’ll measure your driveway, show you paver samples, and deliver a written price before any work starts. Call us at (432) 302-8761 for a free, no-pressure estimate. A live person answers the phone, and you’ll have a real number in writing, not a guess over the phone.
Pricing reflects the Dallas market as of 2026. Mason Remodeling Co Dallas offers free estimates – call (432) 302-8761.
Written by Isaac Pruett, Owner at Mason Remodeling Co Dallas, serving Dallas since 2004.
What Our Customers Say
"Opened up the wall between kitchen and dining room. They handled the beam and permit and the floor transitions look seamless."
- Wendy A."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L.
