Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Dallas?
Walk-in shower installation in Dallas typically runs $4,500 to $12,000, with most homeowners paying around $7,500 for a standard 60-inch alcove conversion using mid-range materials. A basic prefabricated unit with minimal plumbing changes starts near the bottom of that range, while a custom tile shower with a glass enclosure, bench seating, and multiple shower heads lands at the top. Your final price hinges on whether you’re replacing an existing tub or shower, the condition of your plumbing, and the finishes you choose.
Mason Remodeling Co Dallas delivers a written price before any work starts, so you’ll know your exact number before a single tool leaves the truck. Call (432) 302-8761 for a free estimate on your walk-in shower project.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s where the money goes on a typical Dallas walk-in shower installation. These ranges reflect what we’ve seen across neighborhoods like Lakewood, Preston Hollow, Bishop Arts, Richardson, and Plano over the past several years.
- Demolition and haul-away: $400 – $900. Removing the old tub or shower enclosure, disposing of tile, drywall, and any rotted subfloor.
- Plumbing modifications: $600 – $2,000. Moving the drain, replacing the shower valve, upgrading to a thermostatic mixing valve, or relocating supply lines. Homes in older Dallas neighborhoods like East Dallas and Oak Cliff often need more plumbing work due to aging galvanized pipes.
- Waterproofing system: $500 – $1,500. This covers a Schluter Kerdi membrane or similar waterproofing layer behind the tile. It’s the step that prevents mold and leaks that show up two years later.
- Shower pan and drain: $600 – $1,800. A custom mortar bed with a tile-ready drain, or a prefabricated acrylic base. Custom pans cost more but offer better drainage and a truly curbless entry.
- Wall tile and installation labor: $1,200 – $3,500. Ceramic tile runs $3 – $8 per square foot; porcelain runs $5 – $15; natural stone like marble or travertine runs $10 – $30 per square foot. Labor adds $8 – $20 per square foot depending on tile size and pattern complexity.
- Glass shower enclosure: $900 – $3,000. Frameless glass runs higher than framed. A standard swing door with a fixed panel starts around $900; a custom Euro-style enclosure with heavy 3/8-inch glass can hit $3,000 or more.
- Shower fixtures: $300 – $1,500. A standard single-function shower head from Delta or Moen sits at the low end. A rain head, handheld sprayer, body jets, and thermostatic controls from Kohler or Grohe push you up. We install Kohler, Moen, Toto, and Grohe fixtures regularly.
- Accessories and finishing: $200 – $800. Grab bars, corner shelves, a fold-down bench, a recessed niche, and the Schluter strip that seals the tile edge where it meets the bathroom floor.
- Permits and inspections: $150 – $500. The City of Dallas requires permits for plumbing modifications and shower pan replacements. We handle the paperwork and schedule the inspection.
Here’s a quick reference table for the most common project scopes:
- Basic tub-to-shower conversion, prefab base, standard tile, single shower head: $4,500 – $6,500
- Mid-range shower replacement, custom tile walls, frameless glass, rainfall head: $6,500 – $9,000
- Full custom walk-in, curbless entry, bench seating, body jets, floor-to-ceiling stone tile: $9,000 – $12,000+
What moves the number up or down? The biggest driver is whether your existing plumbing needs to be relocated. In a tub-to-shower conversion, the drain moves from the wall-end of the tub to the center of the shower footprint, and the supply lines often shift up. That’s routine work, but it’s not free. Tile choice is the second big variable: ceramic and porcelain keep costs down, while large-format tile (which requires more careful layout and cutting) and natural stone push labor and material costs higher. Glass enclosures are the third swing factor. A simple framed door is affordable; a frameless enclosure with custom angles is a luxury line item.
Dallas-area homes built in the 1950s through 1970s – common in neighborhoods like Casa View, Lake Highlands, and parts of Garland – frequently have cast iron drain lines. If the drain needs replacing or the vent stack has corroded, that’s additional plumbing work we’ll identify during the estimate, not after.
What Affects Walk-In Shower Installation Pricing in Dallas
- Plumbing age and condition. Homes in Dallas built before 1980 often have cast iron or galvanized pipes. Replacing the drain assembly or upsizing from 1.5-inch to 2-inch drain line adds to the total, but it’s work that prevents slow-draining showers and future leaks.
- Shower size and layout. A standard 60-inch by 30-inch alcove shower is the most cost-effective. Expanding to a 72-inch footprint, adding a corner bench, or building a curbless entry requires more tile, more waterproofing, and more labor.
- Tile selection. Ceramic tile is the budget-friendly workhorse. Porcelain offers better durability and water resistance. Natural stone like marble or travertine looks beautiful but requires sealing and more careful installation – and it runs $10 – $30 per square foot before labor.
- Glass enclosure type. Frameless glass panels cost more than framed units but create a cleaner look. The thicker the glass (3/8-inch versus 1/4-inch), the higher the price. Custom hinge placements and notched panels for benches add fabrication costs.
- Accessibility features. A curbless entry, built-in bench, linear drain, and reinforced blocking for future grab bars add real cost but make the shower usable for decades. This matters in Dallas, where many homeowners are planning to age in place rather than move.
- Permit requirements. The City of Dallas requires a plumbing permit for shower valve replacement and drain work. If you’re in a suburb like Irving, Mesquite, or Carrollton, each municipality has its own fee schedule and inspection process. We pull permits as part of every job where required.
How to Save on Walk-In Shower Installation
You don’t need to sacrifice quality to keep your Dallas walk-in shower project within budget. Here’s what actually moves the needle:
- Keep the existing footprint. If your current tub or shower sits in a standard 60-inch alcove, keep it there. Moving walls or expanding the shower footprint adds framing, drywall, flooring, and plumbing costs quickly.
- Choose ceramic or porcelain over natural stone. Modern porcelain tile mimics marble and travertine convincingly at a third of the material cost – and it doesn’t need annual sealing.
- Stick with a single shower head. Body jets require a larger valve, additional supply lines, and more tile work around the spray zones. A high-quality single-function or dual-function head from Moen or Kohler delivers a great shower without the plumbing complexity.
- Use a prefabricated shower pan. A quality acrylic or composite pan installs faster than a custom mortar bed and performs just as well. You can put the savings toward better tile or a frameless glass door.
- Plan for the estimate. Know your tile style, fixture finish, and glass preference before the estimate appointment. It keeps the process shorter and the quote accurate the first time.
Get a free, written estimate for your walk-in shower installation in Dallas. Call (432) 302-8761 or learn more about our walk-in shower installation services in Dallas and how we price every project before work begins.
FAQs – Walk-In Shower Installation Cost
How much does it cost to convert a tub to a walk-in shower in Dallas?
A tub-to-shower conversion in Dallas typically costs $3,500 to $10,000, depending on whether the existing plumbing needs to be relocated and whether you choose a prefabricated base or custom tile. Most conversions land between $5,000 and $8,000. The drain relocation and valve replacement are the primary plumbing costs, while tile and glass make up the remainder. Call (432) 302-8761 for an exact quote – estimates are free.
Is it cheaper to repair or replace a walk-in shower?
If your shower pan is leaking or the waterproofing behind the tile has failed, repair is rarely cheaper in the long run. Patching tile or re-grouting runs $400 to $1,800, but it doesn’t address water damage behind the walls. In Dallas, where foundation movement is common in neighborhoods with expansive clay soil (much of the metro area), hairline cracks in shower pans become entry points for leaks. If the failure is structural, replacement at $4,500 to $12,000 is the honest recommendation. We’ll tell you which one is right for your situation before we quote either option.
How long does walk-in shower installation take in Dallas?
A standard walk-in shower installation takes 3 to 5 working days from demolition to final caulking. Custom tile work, curbless entry construction, or glass enclosure fabrication can extend the timeline by a few days. Permitting with the City of Dallas typically adds 1 to 2 weeks of lead time before the work begins, though we submit permit applications the same week you sign the contract. Your written estimate includes the full project timeline, so you’ll know exactly what to expect before we start.
Does a walk-in shower add value to a home in Dallas?
Yes. In the Dallas market, walk-in showers are consistently cited by local real estate agents as one of the strongest bathroom upgrades for resale appeal, particularly in homes above $400,000. Buyers in neighborhoods like Lakewood, M Streets, and Far North Dallas expect a walk-in shower in the primary bathroom. The return on investment varies, but a well-executed shower replacement typically recoups 60% to 70% of its cost at resale. More importantly, it removes a negotiation point: dated tub-shower combos get flagged in inspections and appraisals.
Can Mason Remodeling install a walk-in shower the same week I call?
We schedule estimates within days, not weeks, and a live person answers our phone 24 hours a day at (432) 302-8761. Installation scheduling depends on current project volume and permitting lead time with your local municipality, but many standard replacements start within 2 to 3 weeks of the signed contract. What won’t delay your project: change orders, surprise invoices, or waiting on subcontracted crews. Every Mason Remodeling technician is background-checked and arrives in uniform with a photo ID badge, and you’ll get their name and photo before they show up. That’s the Threshold Standard, on every job.
What does the Mason Remodeling 365-Day Done Right Promise cover?
Every walk-in shower installation we complete is covered for 365 days from the completion date. If any part of the installation fails during that year – a leak, a loose tile, a door that doesn’t close properly – we return and fix it at no cost to you. The terms are written plainly on your contract: what’s covered, what’s excluded, and how long the coverage lasts. No dispute process, no fine print runaround. If a repair or installation fails, we schedule a free return visit. That’s how Mason Remodeling Co Dallas has done bathrooms since 2004, under the leadership of Isaac Pruett.
Pricing reflects the Dallas market as of 2026. Mason Remodeling Co Dallas offers free estimates – call (432) 302-8761.
Written by Isaac Pruett, Owner at Mason Remodeling Co Dallas, serving Dallas since 2004.
What Our Customers Say
"Opened up the wall between kitchen and dining room. They handled the beam and permit and the floor transitions look seamless."
- Wendy A."Written scope, fixed price, and weekly updates. No change orders we hadn't agreed to."
- Carlos H."Bathroom gut job. Replaced the old tub with a walk-in shower and added a niche. Waterproofing was done properly with a flood test before tile."
- Greg L.
